Mudelipõhised pistikud

Connector for Toyota JZ-series A/C applications, 4-pin.

Connector for GM crankshaft position and MAP sensors, 3-pin.

Connector for GM ignition coils, 7-pin.

Connector for VAG applications, 4-pin (2x2).

Connector for GM LS Gen4 knock sensors, 2-pin.

Connector for Toyota JZ-series speed sensors, 3-pin.

Connector for VAG flex fuel (ethanol content) sensors, 3-pin. OE reference 4F0 973 703.

Connector 6-pole (Chrysler E-Throttle) Included terminals and seals.

Including terminals and seals.

Nissan MAF (Mass Air Meter) connector 6-pin This is a 6-pin connector that fits Nissan 350Z, 370Z, GT-R(R35), Patrol, Navara and GM Throttle and more. Specifications:1x Contact housing6x Pins6x Seals

Delphi Connector 4-pin This is a 4-pin Delphi connector that fits, among other things, GM Idling engines and can handle 14 Amps/pin. Specifications:1x Contact housing4x Pins4x Seals Fits: Delphi Map sensors and throttle position sensors, idling engine and more

Alternator Connector GM 4-pole This is a 4 pin electrical connector that fits several GM Generators. Specifications:1x Contact housing4x Pins4x Seals

Toyota Alternator Connector 4-pin This is a 4-pin electrical connector that fits most Toyota, Lexus, Honda Generators. Specifications:1x Contact housing4x Pins4x Seals Fits, among others, Toyota, Lexus, Honda engines:GRZRAREFROM 2006+Honda's K-Series K24

Delphi 3 bar Mapsensor Connector This is a small 3-pin Delphi connector that fits, among other things, 3-bar map sensors from GM, Haltech, and others. Specifications:1x Contact housing3x Pins3x Seals C. 5vB. Signal outA. ground

VAG's small 3-pin connector This is a small 3-pin VAG connector with dimensions: 25.5x15.5mm Specifications:1x Contact housing3x Pins3x Seals

Connector Toyota TPS 3-pin This is a 3-pin connector that fits, among other things, Toyota TPS and Boost pressure sensor. Specifications:1x Contact housing3x Pins3x Seals

Nissan Map sensor Connector 3-pin This is a 3-pole electrical connector that is mounted on, among others, the Nissan GTR, 370Z. Specifications:1x Contact housing3x sticks3x seals OEM Reference: 22365-JF00C

Nissan Trigger/VVT Connector 3-pin This is a 3-pin electrical connector that is fitted to, among others, the Nissan VQ35/VK45/VK56. The connector fits VVT, crankshaft, camshaft and more. Specifications:1x Contact housing3x Pins3x Seals

VAG Connector 2-pin This is a 2-pole electrical connector that is originally fitted to several VW Group sensors. Specifications:1x Contact housing2x Pins2x Seals

GM IAT Connector 2-pin This is a 2-pin electrical connector that fits, among other things, GM IAT. The pins for this are fitted by running the cable through the connector, then bringing the pins back from the front.

Mercedes Temperature sensor 2-pole electrical connector This is a 2-pin electrical connector that fits, among other things, the Mercedes temperature sensor and some Nissans. OEM Reference:F 02U B00 241-01AAZ02FB

Connector 2JZ (water temp) Contact piece for water temperature sensor that shows level on the instrument housing.

Oil pressure switch 2JZ/1JZ Contact piece that fits 1JZ knock sensor and 2JZ Oil pressure switch.

Connector 3-Pin Delphi Round This is a contact piece that fits Nissan ignition coils, among others. Specification:1x Contact housing3x Pins1x Seals

Connector Nissan Ignition coil This is a contact piece that fits Nissan ignition coils, among others. Specification:1x Contact housing3x Pins3x Seals

Delphi Multec 2-pin Connector This is a connector suitable for Delphi Multec. These contacts are on, among other things, distributor for GM engines. Specifications:1x Contact housing2x Pins2x Seals

Connector 2JZ-GTE Ignition coil This is a contact piece that fits 2JZ OEM ignition coils among others. Specification:1x Contact housing2x Pins

Connector for Bosch P65 ignition coil.

Distributor cable HEI. Contact piece for HEI distributor.