MaxxECU

MaxxECU PRO is a product developed from the ground up to be flexible, reliable and fast. MaxxECU PRO gives the user complete engine control! Specs: Up to 12 cylinders sequentially. 16 injector outputs (low or high impedance injectors). 12 ignition outputs 12 inputs for...

Only adapter!

Only adapter. The OP amplifier needs to be bought separately.

Only adapter

Only adapter.

Adapter only!

Only adapter!

Only adapter!

MaxxECU wiring harness for PDM.

MaxxECU wiring harness for PDM.

Including terminals. For PDM20 connector 2.

Including terminals. For PDM20 connector 1.

The MaxxECU PDM20 is an advanced Power Distribution Module for MaxxECU units and is designed to replace fuses and relays in a modern way. Specs: Max 230A. 20 outputs (8x25A, 8x15A, 4x8A). 7 digital / analog (0-24V) inputs. All outputs can be PWM controlled....

For own manufacturing of wiring harness. For MaxxECU MINI, RACE connector 2 and PRO connector 4. NOTE: Special crimping tool is needed!

MaxxECU wiring harness for MINI.

Advanced entry-level engine control system for up to 4 sequential cylinders. Up to 8 in wasted spark. Faster and easier tuning with the built-in MAP-sensor up to 3 bar / 43.5 psi of boost. Get started faster with the easy-to-use MTune PC-software Specs: Waterproofed...

Wires to MaxxECU IGN output, can be used as ignition amplifier, or to directly drive a NOS solenoid. 30A peak 10A nominal REQUIRES to be mounted on a bigger surface to divert heat.

All cables are 3m long.

All cables are 3m long.

All cables are 3m long.

All cables are 3m long.

Introducing MaxxECU GEN2 RACE – the ultimate engine control system for tuners and racing professionals. When every millisecond matters, on the street, track or dragstrip, the GEN2 RACE gives you access to virtually all engine data, allowing you to fine-tune every aspect for peak...

34-pin superseal 1.0. Including terminals.

34-pin superseal 1.0. Including terminals.

34-pin superseal 1.0. Including terminals.

34-pin superseal 1.0. Including terminals.

Includes both sensor and electronics for outputting 0-5v signal. Sensor for exhaust gas temperature measurement (EGT) with 1.8m cable. mini type-k contact. 1/8 NPT.