Elektroonika

Electronic Throttle Body (68mm bore) Part no: 0 280 750 156 Description- 68mm Bore size- Dual potentiometer redundancy- OE quality and performance-Includes groove on inlet port flange- Use mating connector D 261 205 358-01 SpecificationsApplication and model suitability: - Generic use- Custom applications- Requires...

Bosch motorsport liquid pressure and temperature sensor Thread: M10x1.0 pin2: Pressure signal out (0.5V = 0bar, 4.5V = 10bar)pin3: +5V sensor supplypin4: Sensor GNDpin5: Temperature signal out (0.5V = -40 deg C, 4.5V = 140 deg C) Area of application:Diesel, Petrol, Ethanol, Water, Engine...

Complete spark plug boot suitable VAG / Bosch small1Kohm.

ECU Master Keypad 4 Buttons Built-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard. The behavior of each individual key is fully configurable using the EMU BLACK or PMU client software. The unique idea of a...

ECU Master Keypad 8 Buttons Built-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard. The behavior of each individual key is fully configurable using the EMU BLACK or PMU client software. The unique idea of a...

ECU Master Keypad 12 Buttons Built-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard. The behavior of each individual key is fully configurable using the EMU BLACK or PMU client software. The unique idea of a...

ECU Master Rotary Switch The 8-step ECU Master Rotary switch can be used to control various ECU functions such as Traction Control and Boost Control settings.Installation is simple: connect 5V power, sensor ground, and output signal. The rotary switches can be connected to any...

ECU Master GPS Module V2 The Ecumaster GPS module ensures high-precision position tracking with an update frequency of 25 Hz. The module can use four navigation systems simultaneously: GPS, GLONASS, Galileo, and BeiDou.An external, active antenna with a magnetic base is included in the...

ECU Master EDL-1 Datalogger + BT The EDL-1 datalogger is a "must-have" device for anyone using EMU, EMU CLASSIC, and EMU BLACK. By utilizing serial communication, this device can log over 200 data channels at a frequency of 25Hz. The popular SDHC card with...

ECU Master Gear Indicator The digital gear indicator is designed to work with an original or aftermarket ECU to display the current gear with an optional shift light.Gear calculations are made based on vehicle speed and engine RPM via OBD2 or CAN, or by...

ECU Master DBW Module A module with four analog inputs and CAN-BUS that enables communication with the car's internal systems and instrument panels.Connects directly to CLASSIC's expander port. Maximum 7A H-bridge output current, where only one EMU output is needed to control the electronic...

ECU Master Can-bus Lambda The Ecumaster Lambda for CAN controller is a compact unit that controls a Bosch LSU 4.9 wideband oxygen sensor and transmits lambda readings via CAN-BUS. It has two programmable 0-5V analog signal wires and uses a high-quality digital control unit...

ECUMASTER ADU 5" Display Rev2 ECUMASTER presents the new Racing Dash series with ADU5 and ADU7, designed to provide race drivers with a cost-effective, customizable, and functional dash display with logging capabilities. Featuring high-resolution, anti-glare screens and several preconfigured pages, users can easily customize...

ECU Master Battery isolator (Radlock) The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no mechanical...

ECU Master Battery isolator (Deutch DTM) The Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no...

ECU Master Classic Mounting Bracket Mount your EMU Classic securely and safely with the ECU Master bracket for EMU! The bracket is made of aluminum, laser-cut, and then CNC bent. Each bracket is then powder-coated for a durable and attractive finish. Note: THIS BRACKET...

ECU Master USB to CAN Module The ECUMASTER USB TO CAN is a USB interface that allows the user to connect to the CANbus network. It supports CAN 2.0A and CAN 2.0B standards. The device is equipped with an LED status indicator for quick...

LS2 ignition coil with integrated ignition amplifier Powerful coil with built-lit stage. Connector and ignition cables are not included.

Electronic Throttle Body (74mm bore) Part no: 0280750474 / 0280750779 Description- 74mm Bore size- Dual potentiometer redundancy- OE quality and performance-Includes groove on inlet port flange- Use mating connector D 261 205 358-01 SpecificationsApplication and model suitability: - Generic use- Custom applications- Requires electronic...

Ignition Coil with built-lit stage for 4 cylinder engines, up to 450-500HP Two built-in ignition coils so they run these in Waste-kick.Works to MaxxECU etc.. 1: IGN1 (triggers output A+D)2: +12 V3: IGN2 (triggers outputs C+B)4: Ground Connectors are not included

Cam sensor digital short Digital cam position sensor for cam position detection. Pulldown output. Requires pulse resistance (usually built in ECU). Use with steel trigger. 5-24v supply voltage.Including lock nuts for sensor mounting. This also works as a general crank trigger (tested with 60-2...

Volvo B230 TPS Adapter Adapter to be able to mount 850/960 TPS / throttle position sensor on B230 throttle body. Material: AluminumThickness: 8mm The bracket can be mounted in 2 different ways 1 - Leave old brackets in its place and put this on...

Part no: D 261 205 358-01 Description- Mating connector for electronic throttle, AMP 6-pin SpecificationsApplication and model suitability: Used with Bosch electronic throttle 0 280 750 148, 0 280 750 149, 0 280 750 150, 0 280 750 151, 0 280 750 156, 0...

Cam position adapter Volvo B230 Adapter to fit camshaft sensor on camshaft to enable sequential ignition with aftermarket engine management system on Volvo red engine with distributor on camshaft mounted original. Kit contains:1x Camshaft adapter Volvo B230 (HC09094)1x Camshaft sensor 0232101023 (SPDKG850)1x Trigger wheel...

Electronic Throttle Body (82mm bore) Part no: 0 280 750 473 Description- 82mm Bore size- Dual potentiometer redundancy- OE quality and performance-Includes groove on inlet port flange- Use mating connector D 261 205 358-01 SpecificationsApplication and model suitability: - Generic use- Custom applications- Requires...

Trigger wheel 153 / 65mm (60-2) Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...

Trigger wheel 153 / 65mm (36-1) Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...

Trigger wheel 138mm / 30mm (60-2) Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...

Trigger wheel 138mm / 30mm (36-1) Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...

Trigger wheel 100mm / 57mm 36-1 Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...

Trigger wheel 100mm / 57mm (60-2) Trigger wheel for which fits aftermarket ECU to get crankshaft signal. These are available in 36-1 or 60-2 resolution which is preset in all aftermarket control systems. Used in conjunction with a Hall or VR sensor connected to...