Sensor connectors

Connector for Subaru temperature sensors, 3-pin.

Connector for VAG flex fuel (ethanol content) sensors, 3-pin. OE reference 4F0 973 703.

Connector for GM crankshaft position and MAP sensors, 3-pin.

Connector for GM LS Gen4 knock sensors, 2-pin.

Connector for Bosch LSU 4.9 wideband lambda sensors (guide type), 6-pin.

Connector for Ford throttle position sensors (TPS), 3-pin.

Connector for Toyota JZ-series speed sensors, 3-pin.

Connector housing for Bosch ABS sensors (DF11S type), 2-pin.

3Connector 3-socket housing for eg Honeywell sensor, including pins and seals.

Contactor 3-pin pressure/temp sensor Pin: +5V Supply. SGND. Signal out

Nissan MAF (Mass Air Meter) connector 6-pin This is a 6-pin connector that fits Nissan 350Z, 370Z, GT-R(R35), Patrol, Navara and GM Throttle and more. Specifications:1x Contact housing6x Pins6x Seals

Delphi 3 bar Mapsensor Connector This is a small 3-pin Delphi connector that fits, among other things, 3-bar map sensors from GM, Haltech, and others. Specifications:1x Contact housing3x Pins3x Seals C. 5vB. Signal outA. ground

Connector Toyota TPS 3-pin This is a 3-pin connector that fits, among other things, Toyota TPS and Boost pressure sensor. Specifications:1x Contact housing3x Pins3x Seals

Connector Pressure sensor 3-pole This is a 3-pin connector that fits pressure sensors with no: 2045421618 Specifications:1x Contact housing3x Pins3x Seals

Nissan Map sensor Connector 3-pin This is a 3-pole electrical connector that is mounted on, among others, the Nissan GTR, 370Z. Specifications:1x Contact housing3x sticks3x seals OEM Reference: 22365-JF00C

Nissan Trigger/VVT Connector 3-pin This is a 3-pin electrical connector that is fitted to, among others, the Nissan VQ35/VK45/VK56. The connector fits VVT, crankshaft, camshaft and more. Specifications:1x Contact housing3x Pins3x Seals

Honda IAT/VVT/ECT Connector 2-pin This is a 2-pin electrical connector that fits, among other things, Honda IAT/VVT/ECT

GM IAT Connector 2-pin This is a 2-pin electrical connector that fits, among other things, GM IAT. The pins for this are fitted by running the cable through the connector, then bringing the pins back from the front.

Mercedes Temperature sensor 2-pole electrical connector This is a 2-pin electrical connector that fits, among other things, the Mercedes temperature sensor and some Nissans. OEM Reference:F 02U B00 241-01AAZ02FB

Connector 2JZ (water temp) Contact piece for water temperature sensor that shows level on the instrument housing.

Oil pressure switch 2JZ/1JZ Contact piece that fits 1JZ knock sensor and 2JZ Oil pressure switch.

Temperature sensor connector Subaru Differential Temperature sensor connector for Subaru Impreza & Forester Differential. Specification:1x Contact housing1x Pin1x Seal

Connector 3-Pin Delphi Round This is a contact piece that fits Nissan ignition coils, among others. Specification:1x Contact housing3x Pins1x Seals

Connector Honda K-Serie MAP/TPS/Crankshaft This is a connector that fits the Honda K-Series MAP/TPS/Crankshaft among others. Specification:1x Contact housing3x Pins3x Seals

Connector 5-way socket housing Bosch pressure/temp sensor NOTESome connectors are marked in reverse, so be sure to connect according to what is written on the sensor and not on the connector. pin2: Pressure signal out (0-5V)pin3: +5V sensor supplypin4: Sensor GNDpin5: Temperature signal out...

Connector 6-pin for electric accelerator pedal 1 - Sensor (1) GND2 - +5V sensor (2) supply 3 - TPS 2 (Analog input x)4 - Sensor (2) GND5 - +5V sensor (1) supply6 - TPS 1 (Analog input x) Number 1 is against the maroon...