6 Pin

Connector for Bosch LSU 4.9 wideband lambda sensors (guide type), 6-pin.

Connector for tank penetration Detta är ett 6-poligt kontaktdon som passar till en universal tankgenomföring (Artikelnummer: SPD-CON-113) Varje stift på denna kontakt clear upp until 20 Ampere vid 85°C or 15 Ampere vid 100°C Specifikationer:1x Kontakthus6x Stift

Tank feedthrough 6-pin This is a 6-pin tank feedthrough that fits perfectly to fuel pumps or tank sensors, or both. Each pin can handle 30 Amps at 85°C and 18 Amps at 100°C Contact sold separately.

Connector 2JZ idler (IAC)

Connector 6-pole (Chrysler E-Throttle) Included terminals and seals.

Connector E-gas Siemens VDO 6-pin This is a 6-pin electrical connector that fits Siemens VDO Electronic Gas Dampers. Specifications:1x Contact housing6x Pins6x Seals

Econoseal Connector 6-pin Female Vems This is a 6-pin Econoseal female connector that is used for, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x Seals

Econoseal Connector 6-pin This is a 6-pin Econoseal male connector that fits, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x Seals

Nissan MAF (Mass Air Meter) connector 6-pin This is a 6-pin connector that fits Nissan 350Z, 370Z, GT-R(R35), Patrol, Navara and GM Throttle and more. Specifications:1x Contact housing6x Pins6x Seals

6-way connector kit, 0.5–1.5 mm² contacts, Deutsch DT series.Manufacturer: TE Connectivity

6-way connector kit, 0.5–1.5 mm² contacts, Deutsch DT series.Manufacturer: TE Connectivity

6-way connector kit, 0.5 mm² contacts, Deutsch DTM series.Manufacturer: TE Connectivity

6-way connector kit, 0.5 mm² contacts, Deutsch DTM series.Manufacturer: TE Connectivity

Connector 6pin Bosch compact Electrical connector 6-pinContact housing with loose pins and sealsFor 0.5-1.0 mm2 cable

Connector 6-pin for electric accelerator pedal 1 - Sensor (1) GND2 - +5V sensor (2) supply 3 - TPS 2 (Analog input x)4 - Sensor (2) GND5 - +5V sensor (1) supply6 - TPS 1 (Analog input x) Number 1 is against the maroon...

LSU 4.9 connector (Bosch wide band lambda). Including connector pin, rubber sleeve.

Connector 6-way socket housing (VW E-pedal) 1: +5V sensor supply2: Sensor GND3: +5V sensor supply4: TPS 1 (Analog input x)5: Sensor GND6: TPS 2 (Analog input x)