Tools

Bender tool for aluminium pipes AN8 To be able to easily bend AN aluminum pipes from sizes AN8. From 0-180°

Bender tool for aluminium pipes AN4-AN6 To be able to easily bend AN aluminum pipes from sizes AN4-AN6. From 0-180°

Pipe flaring tool aluminum fuel pipe AN4-AN10 Supplied with pipe cutter for pipes 3-30 mm and adapters to for pipes 5-16 mm Same principle as taper brake pipe but larger dimension. Guide for brake pipes can be found here.

You can use mounting brackets / Vice jaw to assemble an fittings. The brackets have 90 degree angle and magnets at the back to fit a vice. These jaws are made of hard plastic to prevent damage to the an fittings / hose ends.

Adjustable mounting wrench to facilitate mounting of AN3-AN16 AN fittings. The tool is made of alumunium that reduces the risk of damaging the AN fitting. This is the best installation tool that distributes the load to prevent damage to the anodized surface on the...

Adjustable wrench to facilitate mounting of AN3-AN12 AN fittings. The tool is made of alumunium that reduces the risk of damaging the anodized surface of AN fittings.

Flare tool 1/8" - 3/4" A tool to be able to get straight flares / cones . Works with both copper pipe and aluminum pipe. The tool works to:Brake pipe 3/16Brake pipe 1/4 Aluminum tube AN4 (1/4" - 6.35mm)Aluminum tube AN6 (5/16" - 7.94mm)Aluminum...

Brake line flare tool A tool set to quickly make single or double taper brake pipes.

AN-fittings & hose installation kit A complete kit to facilitate assembly and to be able to quickly assemble AN-fittings with hose without damaging the AN-fittings. This installation kit can be used for:AN4AN6AN8AN10AN12

Tube straightener to get straight tubes 3/16" - 1/2" A tool to be able to get straight fine pipes. Works with both copper pipe and aluminum pipe. The tool works to:Brake pipe 3/16Brake pipe 1/4Aluminum tube AN4 (1/4" - 6.35mm)Aluminum tube AN6 (5/16" -...

Assembly key to facilitate mounting of AN16 and An20 AN fittings. An16 in an end and AN20 in the other end. The tool is made of aluminum that reduces the risk of damaging the anodized surface of the AN fittings. NOTE: The tool fits...

High quality tool for cutting braided hose etc. Cut perfectly through AN hoses. Can handle AN12 as most.

Hurricane Hose Cutter Hurricane Hose Cutter are a powerful cutter with rubber-covered handles intended for steel-wrapped hose, but which can also handle space, rubber and more. The large bearing surface means that the pliers do not slip like many others, and makes them stable...

Hurricane Ear Hose Clamp tool Hurricane's pliers are specifically made for ear tube clamps but with their size and strong materials can be used for a wide range of different applications! The handles are also covered in soft rubber to comfortably squeeze the pliers...

SAE Brake Flaring Tool Fits 3/16" brake pipes SAE/DIN 45° Single and Double Cone Can handle both copper (soft), cupronickel (harder) and steel (hardest) brake pipes Can also be used to taper fuel pipes Compact design