connector
-
Connector 5-way socket housing Bosch pressure/temp sensor NOTESome connectors are marked in reverse, so be sure to connect according to what is written on the sensor and not on the connector. pin2: Pressure signal out (0-5V)pin3: +5V sensor supplypin4: Sensor GNDpin5: Temperature signal out...Regular price $11.00 USDRegular priceUnit price per
-
Connector 6-pole (Chrysler E-Throttle) Included terminals and seals.Regular price $14.00 USDRegular priceUnit price per
-
D-jetronic Connector 2-pin This is a 2-pole electrical connector that fits D-Jetronic spreaders and also some temp sensors. Specifications:1x contact housing2x pinsRegular price $4.00 USDRegular priceUnit price per
-
Delphi Connector 3-pin This is a 3-pin Delphi connector that is used for several applications that may need a little stronger current. The pins can handle 14 Ampere/pin. Specifications:1x Contact housing3x Pins3x SealsRegular price $9.00 USDRegular priceUnit price per
-
Connector 3-Pin Delphi Round This is a contact piece that fits Nissan ignition coils, among others. Specification:1x Contact housing3x Pins1x SealsRegular price $6.00 USDRegular priceUnit price per
-
Delphi Connector 4-pin This is a 4-pin Delphi connector that fits, among other things, GM Idling engines and can handle 14 Amps/pin. Specifications:1x Contact housing4x Pins4x Seals Fits: Delphi Map sensors and throttle position sensors, idling engine and moreRegular price $8.00 USDRegular priceUnit price per
-
Regular price $10.00 USDRegular priceUnit price per
-
Connector 12-pin GT150 (Mounted on MaxxECU lead)Regular price $11.00 USDRegular priceUnit price per
-
GT150 12-pin connector (Included in all MaxxECU packages)Regular price $14.00 USDRegular priceUnit price per
-
Regular price $13.00 USDRegular priceUnit price per
-
Regular price $13.00 USDRegular priceUnit price per
-
Delphi 3 bar Mapsensor Connector This is a small 3-pin Delphi connector that fits, among other things, 3-bar map sensors from GM, Haltech, and others. Specifications:1x Contact housing3x Pins3x Seals C. 5vB. Signal outA. groundRegular price $10.00 USDRegular priceUnit price per
-
Delphi Multec 2-pin Connector This is a connector suitable for Delphi Multec. These contacts are on, among other things, distributor for GM engines. Specifications:1x Contact housing2x Pins2x SealsRegular price $8.00 USDRegular priceUnit price per
-
Denso Alternator Connector 3-pin This is a 3-pin electrical connector that fits on generators from Denso with a 3-pin oval connector Specifications:1x Contact housing3x sticks3x sealsRegular price $27.00 USDRegular priceUnit price per
-
Connector 6-pin for electric accelerator pedal 1 - Sensor (1) GND2 - +5V sensor (2) supply 3 - TPS 2 (Analog input x)4 - Sensor (2) GND5 - +5V sensor (1) supply6 - TPS 1 (Analog input x) Number 1 is against the maroon...Regular price $14.00 USDRegular priceUnit price per
-
Connector E-gas Siemens VDO 6-pin This is a 6-pin electrical connector that fits Siemens VDO Electronic Gas Dampers. Specifications:1x Contact housing6x Pins6x SealsRegular price $21.00 USDRegular priceUnit price per
-
Econoseal 10-pin connector Female This is a 10-pin Econoseal connector used, among other things, for Vem's control system. Specifications:1x Contact housing10x Pins10x SealsRegular price $11.00 USDRegular priceUnit price per
-
Econoseal 10-pin connector Male This is a 10-pin Econoseal connector used, among other things, for Vem's control system. Specifications:1x Contact housing10x Pins10x SealsRegular price $11.00 USDRegular priceUnit price per
-
Econoseal Connector 6-pin Female Vems This is a 6-pin Econoseal female connector that is used for, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x SealsRegular price $7.00 USDRegular priceUnit price per
-
Econoseal Connector 6-pin This is a 6-pin Econoseal male connector that fits, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x SealsRegular price $7.00 USDRegular priceUnit price per
-
Regular price $10.00 USDRegular priceUnit price per
-
GM IAT Connector 2-pin This is a 2-pin electrical connector that fits, among other things, GM IAT. The pins for this are fitted by running the cable through the connector, then bringing the pins back from the front.Regular price $9.00 USDRegular priceUnit price per
-
H4 Lamp Connector 3-pin Electrical connector that fits H4 lamps. Specifications:1x Contact housing3x sticksRegular price $5.00 USDRegular priceUnit price per
-
Honda IAT/VVT/ECT Connector 2-pin This is a 2-pin electrical connector that fits, among other things, Honda IAT/VVT/ECTRegular price $6.00 USDRegular priceUnit price per
-
Connector Honda Ignition coil This is a contact piece that fits Honda ignition coils, among others. Specification:1x Contact housing3x Pins3x SealsRegular price $6.00 USDRegular priceUnit price per
-
Connector Honda K-Serie MAP/TPS/Crankshaft This is a connector that fits the Honda K-Series MAP/TPS/Crankshaft among others. Specification:1x Contact housing3x Pins3x SealsRegular price $6.00 USDRegular priceUnit price per
-
Regular price $6.00 USDRegular priceUnit price per
-
Regular price $25.00 USDRegular priceUnit price per
-
Regular price $11.00 USDRegular priceUnit price per
-
LSU 4.9 connector (Bosch wide band lambda). Including connector pin, rubber sleeve.Regular price $11.00 USDRegular priceUnit price per
-
Regular price $10.00 USDRegular priceUnit price per
-
Regular price $9.00 USDRegular priceUnit price per
