unbranded

Ignition cable set straight angel Red A set includes 10 with 2 which are 650mm to the ignition coil. The ignition cable set comes with 2 models of connections to the distributor. One for internal attachment and the other for external attachment. This is...

Ignition Coil with built-lit stage for 4 cylinder engines, up to 450-500HP Two built-in ignition coils so they run these in Waste-kick.Works to MaxxECU etc.. 1: IGN1 (triggers output A+D)2: +12 V3: IGN2 (triggers outputs C+B)4: Ground Connectors are not included

Ignition Coil with built-lit stage. 3 built coils running in wastespark mode for a 6 cylinder engine.Works with MaxxECU units manufactured after 2018-02 (REV2 HW) Ignition module pin 1: GNDIgnition module pin 2: IGN1Ignition module pin 3: IGN2Ignition module pin 4: IGN3Ignition module pin...

Ignition module 2 outlets ConnectionPin 1: Coil 1Pin 2: Input 1Pin 3: Not usedPin 4: GroundPin 5: Not usedPin 6: Coil 2Pin 7: Input 2 OEM Ref: TM102502271002000227100204022710021302271002155DA006623601138401138402

Intake manifold Chevrolet Big Block Air Gap Ovalport Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. The Air Gap intake has a space below the plenum chamber for better cooling....

Intake manifold Chevrolet Big block Oval Two-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Big Block Ovalport (Fits most original engines)Flange: 4150 / 4160Materials : AluminumHeight: 4.85? (12.3cm)Type: Dual-level...

Intake manifold Chevrolet Big block Single plane One-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Big Block OvalportFlange: 4150 / 4160Material: AluminumHeight: 6,06? (15,4cm)Rpm: 3,000-7,500Type: Single-level intake

Intake Chevrolet LS1, LS2, LS6 EFI Aluminum intake fits Chevrolet, Pontiac and GMC LS1, LS2, LS6 EFI An intake for EFI (Electronic fuel injection) engines that is made of 3.5mm aluminum and is suitable for 2500-7500 rpm. Equipped with vacuum ports at the bottom...

Intake manifold Chevrolet LS1, LS2, LS6 EFI (High) Aluminum intake suitable for Chevrolet LS1, LS2, LS6 EFI An intake for EFI (Electronic fuel injection) engines that is made of 3.5mm aluminum and is suitable for 2500-7500 rpm. Equipped with vacuum ports underneath and socket...

Intake manifold Chevrolet LS1, LS2, LS6 EFI (High) Aluminum intake suitable for Chevrolet LS1, LS2, LS6 EFI An intake for EFI (Electronic fuel injection) engines that is made of 3.5mm aluminum and is suitable for 2500-7500 rpm. Equipped with vacuum ports underneath and socket...

Intake manifold Chevrolet Small Block (Dual) Single-level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Small Block -86 (NOTE! The bolts slant into the top)Flange: 4150 / 4160Material: AluminumHeight: 7?...

Intake manifold Chevrolet Small Block -86 Two-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Small Block -86 (NOTE! The bolts slant into the top)Flange: 4150 / 4160Material: AluminumHeight: 4,65?...

Intake manifold Chevrolet Small Block -86 Air Gap Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. The Air Gap intake has a space below the plenum chamber for better cooling....

Intake manifold Chevrolet Small Block 86- Vortec Dual-level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Small Block Vortec (NOTE! The bolts straight from above)Flange: 4150 / 4160Material: AluminumHeight: 4,250?...

Intake manifold Chevrolet Small block Single level Single-level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet Small Block -86 (NOTE! The bolts slant into the top)Flange: 4150 / 4160Material: AluminumHeight:...

Intake manifold Chevrolet Small Block Vortec Air Gap Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. The Air Gap intake has a space below the plenum chamber for better cooling....

Intake manifold Chrysler Small Block Air Gap Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. The Air Gap intake has a space below the plenum chamber for better cooling. Fits:...

Intake manifold Ford 351W Dual-plane Two-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Ford 351W (12bolt). Also fits 16-bolt up to -74Flange: 4150 / 4160Material: AluminumHeight: 5,12? (13cm)Rpm: 1,500-6,500Type: Two-plane...

Intake manifold Ford 351W Single-level Single-level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Ford 351W (12bult)Flange: 4150 / 4160Material: AluminumHeight: 5,68? (14,5cm)Rpm: 3,500-7,500Type: Single level intake

Intake manifold Ford FE Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Ford FE 332-428 CuiFlange: 4150 / 4160Material: AluminumHeight: 5,46? (13.9cm)Rpm: 1,500-6,500 VarvType: Dual level intake

Intake manifold Ford Small Block Dual level intake suitable for carburetors. Fits: Ford 289, 302W, 5,0LFlange: 4150 / 4160Material: AluminumHeight: 4,12? (10,5cm)Rpm: 1,500-6,500Type: Dual level intake

Intake manifold Ford Small Block Air Gap Dual level intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. The Air Gap intake has a space below the plenum chamber for better cooling. Fits:...

Intake manifold GM LS, Chevy, Pontiac Two-plane Two-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet, Pontiac and GMC LS1, LS2, LS6 (Cathedral Gate)Flange: 4150Material: AluminumHeight: 5.6? (14.2cm)Rpm: 2,500-7,000Type: Two-plane...

Intake manifold GM LS, Chevy, Pontiac One-plane One-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Chevrolet, Pontiac and GMC LS1, LS2, LS6 (Cathedral Gate)Flange: 4150Material: AluminumHeight: 4,95? (12,5cm)Rpm: 2,500-7,000Type: One-plane...

Intake Manifold GM LS3 Intake in aluminum suitable for Chevrolet, Pontiac and GM LS3, L92. An intake for EFI (Electronic fuel injection) engines that is made of 3.5mm aluminum and is suitable for 2500-7500 rpm. Information:O-ring seals and nipples for the vacuum ports are...

Intake Manifold GM LS7 Intake in aluminum suitable for Chevrolet, Pontiac and GM LS7. An intake for EFI (Electronic fuel injection) engines that is made of 3.5mm aluminum and is suitable for 2500-7500 rpm. Information:O-ring seals and nipples for the vacuum ports are included.4...

Intake manifold Oldsmobile 400 425 455 Single level One-plane intake suitable for carburetors or for those who want to convert to electronic fuel injection (EFI) with the Holley Sniper. Fits: Oldsmobile 400 425 455Flange: 4150 / 4160Material: AluminumHeight: 5,5? (13,9cm)Rpm: 4,500-7,500Type: Single-level intake

Intake Smallblock Chevrolet 4150 EFI Single-plane intake for injection. Fits: Chevrolet Smallblock Gen 1Material: AluminiumHeight: 5.5? (13.9cm)RPM: 2,500-7,500 RPM Included:Fuelrails, bolts and couplings