Intake system

Aluminium cone (50-76mm) Legnth: 66,5mm3mm wall thickness.Weldable T6060 material.

Hurricane pre-filter to air filter - long Hurricane pre-filter is mounted over the air filter. This pre-filter protects the air filter from dirt, water, etc. and keeps the air filter fresh for a very long time. The pre-filter is made of the highest quality...

180 degrees alloy elbow with a diameter 102mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

Hurricane pre-filter to air filter - short Hurricane pre-filter is mounted over the air filter. This pre-filter protects the air filter from dirt, water, etc. and keeps the air filter fresh for a very long time. The pre-filter is made of the highest quality...

Extra large weld-on aluminum flange for Bosch Motorsport DBW throttle body e-throttle. Specially made large outer dimension for easier installation on many aftermarket intake manifolds. Inner diameter 76mm to match perfectly the mounting surface for throttle body. Approximate dimensions: 12mmx106mmx122mm O-ring included in the...

Aluminium elbow with ribbing on each end. 2mm thick walls grant low weight and high durability. Additional ribbing on the ends stops silicone connectors from falling of under pressure which makes those aluminium pipes perfect for intake and cooling systems. Type: Elbow 135' Diameter:...

180 degrees alloy elbow with a diameter 102mm, made of pipe a length 30cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

135 degrees alloy elbow with a diameter 95mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

180 degrees alloy elbow with a diameter 95mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

Weld-on aluminum flange for Bosch Motorsport DBW throttle body e-throttle. O-ring included in the kit. M6x1mm threads in the flange. Mounting bolts not included. Fits Bosch Throttle Body pn 0280750156

Weld-on aluminum flange for Bosch Motorsport DBW throttle body e-throttle. O-ring included in the kit. M6x1mm threads in the flange. Mounting bolts not included. Fits throttle bodies Bosch pn 0280750473 / 0280750780

Weld-on aluminum flange for Bosch Motorsport DBW throttle body e-throttle. O-ring included in the kit. M6x1mm threads in the flange. Mounting bolts not included. Fits throttle bodies Bosch pn 0280750474 / 0280750779

S-shaped alloy pipe with a diameter of 102mm, and length of 60cm, with swaged ends, is best suited for the construction of the intake system. Pipewall thickness of 2mm makes the pipe light and also provideshigh pressure resistance at the inlet. Pipe may as...

180 degrees alloy elbow with a diameter 89mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

Aluminium elbow with ribbing on each end. 2mm thick walls grant low weight and high durability. Additional ribbing on the ends stops silicone connectors from falling of under pressure which makes those aluminium pipes perfect for intake and cooling systems. Type: Elbow 135' Diameter:...

75 degrees alloy elbow with a diameter 102mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

Aluminium elbow with ribbing on each end. 2mm thick walls grant low weight and high durability. Additional ribbing on the ends stops silicone connectors from falling of under pressure which makes those aluminium pipes perfect for intake and cooling systems. Type: Elbow 90' Diameter:...

Aluminium elbow with ribbing on each end. 2mm thick walls grant low weight and high durability. Additional ribbing on the ends stops silicone connectors from falling of under pressure which makes those aluminium pipes perfect for intake and cooling systems. Type: Elbow 135' Diameter:...

45 degrees alloy elbow with a diameter 102mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

90 degrees "L" type alloy elbow with a diameter 102mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at...

180 degrees alloy elbow with a diameter 95mm, made of pipe a length 30cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

90 degrees alloy elbow with a diameter 95mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at the inlet....

S-shaped alloy pipe with a diameter of 95mm, and length of 60cm, with swaged ends, is best suited for the construction of the intake system. Pipewall thickness of 2mm makes the pipe light and also provideshigh pressure resistance at the inlet. Pipe may as...

90 degrees "L" type alloy elbow with a diameter 95mm, made of pipe a length 60cm, with swaged ends, is best suited for the construction of the intakesystem. Pipe wall thickness of 2mm makes the elbow light and also provides high pressure resistance at...

Aluminium cone (50-60mm) Legnth: 66,5mm3mm wall thickness.Weldable T6060 material.

Velocity stack in aluminium for weldning. Smallest inside diameter: 45mm The first 80 mm is 45mm insideThe last 5cm funnel up to 52mm where it finally becomes a full radius velocity stack.

Velocity stack in aluminium for weldning. Smallest inside diameter: 40mm Materiel thickness: 2mm The first 80 mm is 40mm insideThe last 5cm funnel up to 48mm where it finally becomes a full radius velocity stack.

Velocity stack in aluminium for weldning. Smallest inside diameter: 50mm Materiel thickness: 2mm The first 80 mm is 50mm insideThe last 5cm funnel up to 57mm where it finally becomes a full radius velocity stack.

Velocity stack in aluminium for weldning. Smallest inside diameter: 47mm Materiel thickness: 1,5mm The first 80 mm is 47mm insideThe last 5cm funnel up to 54mm where it finally becomes a full radius velocity stack.

Aluminium pipe with ribbing on each end. 2mm thick walls grant low weight and high durability. Additional ribbing on the ends stops silicone connectors from falling of under pressure which makes those aluminium pipes perfect for intake and cooling systems. Lenght: 60cm Diameter: 102mm...

S-shaped alloy pipe with a diameter of 89mm, and length of 60cm, with swaged ends, is best suited for the construction of the intake system. Pipewall thickness of 2mm makes the pipe light and also provideshigh pressure resistance at the inlet. Pipe may as...