Electrical connectors

Female sockets, 1–2 mm², nickel-plated, Deutsch DT series. Pack of 10.Manufacturer: TE Connectivity

Dust cover for 2-way Deutsch DT connectors. Protects the connector interface when the two halves are not mated. Black, glass-filled polyamide (PA GF).Manufacturer: TE Connectivity

Pass-through for DT connector Sold without pins, select pins below

Pass-through for DT connector Sold without pins, select pins below

Connector BOSCH BR540 & DW400 intank Fuel pump This is an electrical connector that fits the DW400 intake pump and the Bosch BR540 with a 27cm cable. Specifications: Cables that withstand all fuels Cable area AWG 14 (2.08mm²) Raychem Spec 55 cable (Tefzel) Conductor...

AMP / Tyco Connector 34-pin Superseal (3-row) 34-pin connector with 3 rows from the Superseal 1.0 Series. The positions are numbered. Pin count: 34Rows: 3Cable: 0.5-1.5mm²Material: PET plasticSeal material: SiliconeTemperature: -40 - 125°C Contains:1x Connector34x Pins

Motec/HaltechConnector 26-pin This is a 26-Pin connector that fits several control boxes including Motec and Halltech. Specifications:1x Contact housing27x Pins (1 extra)

Econoseal 10-pin connector Male This is a 10-pin Econoseal connector used, among other things, for Vem's control system. Specifications:1x Contact housing10x Pins10x Seals

Econoseal 10-pin connector Female This is a 10-pin Econoseal connector used, among other things, for Vem's control system. Specifications:1x Contact housing10x Pins10x Seals

Connector E-gas Siemens VDO 6-pin This is a 6-pin electrical connector that fits Siemens VDO Electronic Gas Dampers. Specifications:1x Contact housing6x Pins6x Seals

Econoseal Connector 6-pin Female Vems This is a 6-pin Econoseal female connector that is used for, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x Seals

Econoseal Connector 6-pin This is a 6-pin Econoseal male connector that fits, among other things, Vem's control system. Specifications:1x Contact housing6x Pins6x Seals

Tank feedthrough 6-pin This is a 6-pin tank feedthrough that fits perfectly to fuel pumps or tank sensors, or both. Each pin can handle 30 Amps at 85°C and 18 Amps at 100°C Contact sold separately.

Connector for tank penetration Detta är ett 6-poligt kontaktdon som passar till en universal tankgenomföring (Artikelnummer: SPD-CON-113) Varje stift på denna kontakt clear upp until 20 Ampere vid 85°C or 15 Ampere vid 100°C Specifikationer:1x Kontakthus6x Stift

Nissan MAF (Mass Air Meter) connector 6-pin This is a 6-pin connector that fits Nissan 350Z, 370Z, GT-R(R35), Patrol, Navara and GM Throttle and more. Specifications:1x Contact housing6x Pins6x Seals

Delphi Connector 4-pin This is a 4-pin Delphi connector that fits, among other things, GM Idling engines and can handle 14 Amps/pin. Specifications:1x Contact housing4x Pins4x Seals Fits: Delphi Map sensors and throttle position sensors, idling engine and more

Delphi 5-pin connector Specifications:1x Contact housing5x Pins5x Seals

Alternator Connector GM 4-pole This is a 4 pin electrical connector that fits several GM Generators. Specifications:1x Contact housing4x Pins4x Seals

Bosch Compact Connector 4-pin Female This is a 4-pin electrical connector that fits the 4-pin Bosch Compact Male. Specifications:1x Contact housing4x Pins4x Seals

Toyota Alternator Connector 4-pin This is a 4-pin electrical connector that fits most Toyota, Lexus, Honda Generators. Specifications:1x Contact housing4x Pins4x Seals Fits, among others, Toyota, Lexus, Honda engines:GRZRAREFROM 2006+Honda's K-Series K24

Delphi 3 bar Mapsensor Connector This is a small 3-pin Delphi connector that fits, among other things, 3-bar map sensors from GM, Haltech, and others. Specifications:1x Contact housing3x Pins3x Seals C. 5vB. Signal outA. ground

Delphi Connector 3-pin This is a 3-pin Delphi connector that is used for several applications that may need a little stronger current. The pins can handle 14 Ampere/pin. Specifications:1x Contact housing3x Pins3x Seals

VAG's small 3-pin connector This is a small 3-pin VAG connector with dimensions: 25.5x15.5mm Specifications:1x Contact housing3x Pins3x Seals

Connector Toyota TPS 3-pin This is a 3-pin connector that fits, among other things, Toyota TPS and Boost pressure sensor. Specifications:1x Contact housing3x Pins3x Seals

Connector Pressure sensor 3-pole This is a 3-pin connector that fits pressure sensors with no: 2045421618 Specifications:1x Contact housing3x Pins3x Seals