{"title":"Other modules","description":"","products":[{"product_id":"ecu-master-black","title":"ECUMaster EMU Black","description":"\u003cp\u003e\u003cstrong\u003eECU Master Black\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eECU Master EMU Black is a highly advanced and modern engine management system that can control both 2-stroke and 4-stroke engines in sequential up to 6 cylinders or waste-fire up to 12 cylinders.\u003c\/p\u003e\n\u003cp\u003eEMU Black has built-in support for CAN-BUS, EGT, DBW (E-Gas), sensors, broadband lambda and much more\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eECU Master EMU is very stable and very easy to calibrate and navigate. In addition, updates are regularly updated with new features and improvements.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Technical details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e-6pc injectors outputs (5A) \u003cbr\u003e-6pcs AUX outputs (6A) \u003cbr\u003e-6pc Ignition outputs - for passive or active coils, configurable (15A) \u003cbr\u003e-4pc stepper motor outputs - bipolar \/ unipolar (6.5A) \u003cbr\u003e-1 CAN-BUS channel (CAN 2.0B) \u003cbr\u003e-1 serial output \u003cbr\u003e-2 EGT inputs \u003cbr\u003e-2 pcs knock sensor inputs \u0026lt; br \/\u0026gt; -1 built-in broadband lambda controller for Bosch LSU 4.2 or 4.9 sensor. \u003cbr\u003e-1 Flexfuel input \u003cbr\u003e-Built-in map sensor 400kPa \u003cbr\u003e-Built-in bar sensor \u003cbr\u003e-4pcs digital trigger inputs for VR \/ HALL sensors - (1st crank position sensor, 2 cam position sensors, 1 speed sensor) \u003cbr\u003e-Support for VANOS, VVTi and other variable cam systems (controls up to 2 individual cams) \u003cbr\u003e-Advanced setting for \"paddle shift\" and \"gear cut\" \u003cbr\u003e-3 dedicated analog inputs for TPS , CLT, IAT \u003cbr\u003e-Built-in \"Drive By Wire\" support, for dampers. \u003cbr\u003e-6 analog inputs (0-5V) for eg oil pressure, fuel pressure, oil temp etc. \u003cbr\u003e-3 specific switches for e.g. launch control, flat shift etc. \u003cbr\u003e-Waterproof and dustproof IP67 enclosure \u003cbr\u003e-Supports 1-6 cylinders sequentially. Can control up to 12 cylinders. \u003cbr\u003e-Max 16000rpm \u003cbr\u003e-Injection time resolution is 16us \u003cbr\u003e-The ignition resolution is 0.5 ° \u003cbr\u003e-Nail detection 1-20 kHz \u003cbr\u003e-Speed ??Density, Alpha- The N-algorithm \u003cbr\u003e-VE table is 16x20 squares, the resolution is 0.1% VE \u003cbr\u003e-The ignition table is 16x20 squares, the resolution is 0.5 ° \u003cbr\u003e-AFR table is 16x20 squares, the resolution is 0.1 AFR \u003cbr\u003e-Very advanced fuel algorithm based on actual volumetric efficiency \u003cbr\u003e-Fully calibrated ignition coil \/ ignition coil time \u003cbr\u003e-Fully calibrated IAT, CLT \u0026amp; lt; br \/ \u0026amp; gt; -PID idle control strategy \u003cbr\u003e-Cheap pressure control \u003cbr\u003e-Nitro control \u003cbr\u003e-Aux outputs for fuel pumps, fans etc. \u003cbr\u003e-Fully adjustable settings for start control, shift light, flat shift (shift) and much more. \u003cbr\u003e-Advanced logging of over 100 parameters with a resolution of 25Hz \u003cbr\u003e-Safety functions to ensure motor functionality. \u003cbr\u003e-USB communication directly to the computer \u003cbr\u003e-User-friendly software with free firmware upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Tablet and Bluetooth support \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601502749012,"sku":"SPDECUMB","price":1209.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-black.webp?v=1776856557"},{"product_id":"ecu-master-pmu-16dl","title":"ECU master PMU-16DL","description":"\u003cp\u003e\u003cstrong\u003eECU Master PMU-16DL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA few decades ago, the most critical electronic components in a race car were the ignition coil and distributor. Today, race cars are equipped with advanced engine management systems, braking systems, paddle shifters, data loggers, radios, electric pumps, fans, and lighting. Each component must be controlled at the right time, and it is crucial that all systems have protection to prevent damage or fire.\u003c\/p\u003e\n\u003cp\u003eTraditionally, fuses and relays have been used to manage these functions, but they come with several disadvantages, such as complicated wiring harnesses, sensitivity to vibrations and temperature changes, and difficulties with diagnostics.\u003c\/p\u003e\n\u003cp\u003eThese challenges can be effectively addressed with our intelligent power management unit (PMU). Our latest PMU unit represents the latest in technology and offers 16 high-current outputs to power lighting, fans, pumps, and more. It ensures constant voltage monitoring and short-circuit protection on all channels, completely eliminating the need for fuses and relays.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eTemperature Range: AECQ100 GRADE1 (-40 to +125?C)\u003c\/li\u003e\n\u003cli\u003eCPU: 32-bit automotive processor, 90MIPS\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6-22V, transient immunity per ISO 7637\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 60, custom CNC-machined aluminum\u003c\/li\u003e\n\u003cli\u003eSize (mm) and Weight (g): 131x112x32.5, 370g\u003c\/li\u003e\n\u003cli\u003eConnections: 1 x 39-pin automotive connector,\u003cbr\u003e1 x M6 bolt for battery connection\u003c\/li\u003e\n\u003cli\u003ePC Communication: CAN (ECUMASTER USBtoCAN, PEAK CAN, KVASER)\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eOUTPUTS:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eHigh-current outputs: 10 x 25A (continuous), 6 x 15A (continuous) with overcurrent and\u003c\/li\u003e\n\u003cli\u003eoverheating protection. The outputs can be paired to increase the continuous current capacity.\u003c\/li\u003e\n\u003cli\u003eCurrent and voltage are measured for each output.\u003c\/li\u003e\n\u003cli\u003eTotal current output: 150A continuous\u003c\/li\u003e\n\u003cli\u003eStep for output current control: 100mA\u003c\/li\u003e\n\u003cli\u003eWiper output: Dedicated output with wiper braking function\u003c\/li\u003e\n\u003cli\u003e+5V: Monitored 5V, 500mA output to power external sensors.\u003c\/li\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINPUTS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eAnalog inputs: 16 inputs, 10 bits resolution, 0-5V (protected), with software-selectable 10K\u003c\/li\u003e\n\u003cli\u003eOhm pull-up and pull-down.\u003c\/li\u003e\n\u003cli\u003eCAN keyboard: 2 x Ecumaster keyboards (4, 6, 8, 12 keys).\u003c\/li\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOTHER:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eOutput status indication: 16 bi-color LEDs\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: 3D accelerometer with 3D gyroscope for logging and\u003c\/li\u003e\n\u003cli\u003ecrash detection. Real-time clock: Yes, supercapacitor for backup power (up to 3 days)\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eCAN BUS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eCAN interface: 2 x CAN2.0 A\/B\u003c\/li\u003e\n\u003cli\u003eCAN standard: CAN2.0 A\/B – 125, 250, 500, 1000 kbps\u003c\/li\u003e\n\u003cli\u003eIn\/Out current: User-defined with bit masking, up to 100 input messages\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eLOGGING:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eLogging memory: 256 Mbyte\u003c\/li\u003e\n\u003cli\u003eLogging speed: Variable, defined per channel, up to 500 Hz\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eLinks and Manuals:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003ePMU software package 101.2 (2024\/10\/24)\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003ePMU software change log\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca\u003ePMU User Manual 101.1.1 (2024\/10\/08)\u003cbr\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca\u003e\u003cstrong\u003ePMU-16 Pinout 1.1 (2023\/10\/06)\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003ePMUs comparison table\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601502880084,"sku":"SPDPMU16DL","price":1480.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-PMU.webp?v=1776856561"},{"product_id":"ecu-master-classic","title":"ECUMaster EMU Classic","description":"\u003cp\u003e\u003cstrong\u003eECU Master Classic\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eECU Master EMU Classic is a highly advanced and modern engine management system that can control both 2-stroke and 4-stroke engines in sequential up to 6 cylinders or waste-fire up to 12 cylinders.\u003c\/p\u003e\n\u003cp\u003eEMU Black has built-in support for CAN-BUS, EGT, DBW (E-Gas), sensors, broadband lambda and much more\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eECU Master EMU is very stable and very easy to calibrate and navigate. In addition, updates are regularly updated with new features and improvements.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Technical details: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e-6 ignition outputs WITH built-in drive stages. Able to drive both active and passive coils. Perfect for those who drive a BMW turbo, for example.\u003cbr\u003e-6pcs (5A) diffuser drive.\u003cbr\u003e-Double cam control.\u003cbr\u003e-Support for double cam triggers (VR, HALL, Opti)\u003cbr\u003e-Primary triggers take VR, HALL or optical. All common patterns.\u003cbr\u003e-Built-in 4 bar map sensor.\u003cbr\u003e-2 built-in exhaust temp channels (EGT).\u003cbr\u003e-Built-in broadband lambda. (Bosch 4.2) It is of course possible to use an external meter and take out an analog signal if you want to drive with a meter in the car.\u003cbr\u003e-4 pcs stepper outputs.\u003cbr\u003e-6st AUX (5A).\u003cbr\u003e-2 inputs for driving with active knock control.\u003cbr\u003e-Exact charge pressure control. Either open or closed loop.\u003cbr\u003e-Exact and fast lambda control.\u003cbr\u003e- Pre-entered sensor value for the most common sensors on the market.\u003cbr\u003e-Limphome mode if any sensor breaks. This can also be connected to the check engine lamp.\u003cbr\u003e-VE 16x16.\u003cbr\u003eIgnition table 16x16.\u003cbr\u003e-Barometer compensation.\u003cbr\u003eIdle control of the type PWM, Stepper, 3-wire PWM, ON \/ OFF and unipolar steppers. Ie 95% -of all standard idle engines. You can run them either open or closed loop.\u003cbr\u003e-Those who do not drive with an idle engine, there is an active regulation of the ignition angle that helps you to a stable and even idle.\u003cbr\u003e-User-friendly software in 2D, 3D or table.\u003cbr\u003e-Extremely good and fast logging that can log 100 parameters. You decide how many and which parameters you want to keep track of.\u003cbr\u003e-Communication is pure USB no hassle with adapters.\u003cbr\u003e-High quality of the connectors and cable harnesses.\u003cbr\u003e-Manual in English.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Tablet and Bluetooth support \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601502945620,"sku":"SPDECUMC","price":919.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-classic.webp?v=1776856563"},{"product_id":"ecu-master-emu-can-bus-bluetooth-modul","title":"ECU Master EMU Can-bus bluetooth modul","description":"\u003cp\u003e\u003cstrong\u003eECU Master EMU Can-bus Bluetooth Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe CAN Bus Bluetooth adapter for ECUMaster EMU Black enables wireless display of ECU parameters on an Android tablet or phone.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adapter is intended for the CAN version of EMU (with 6 pins on the expansion port compared to 5 pins on the standard EMU) or for a standard EMU with a CAN expansion module, as well as for EMU Black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have an EMU Classic with a 5-pin expansion port, you should instead purchase the serial Bluetooth adapter. (This is linked below)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Android app allows the user to customize the style and size of the gauges and choose which parameters to display. You no longer have to deal with bulky gauge clusters and instrument panels filled with gauges, as all important information can be displayed quickly and easily on a device.\u003c\/p\u003e\n\u003cp\u003eThe Bluetooth adapter offers fantastic value, especially compared to buying gauges or a racing instrument panel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck compatibility:\u003c\/strong\u003e\u003cbr\u003eMake sure your EMU Black is the CAN version, which can be identified by its 6-pin expansion port. If your EMU Black has a 5-pin expansion port, you will need the serial Bluetooth adapter instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003e\u003cstrong\u003eFree application available in the Google Play Store.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAvailable in serial or CAN version.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegistered channels:\u003c\/strong\u003e\u003cbr\u003eRPM, MAP, TPS, IAT, AFR, CLT, LAMBDA, BATTERY VOLTAGE, IGNITION ANGLE, INJECTORS PW, SEC. INJECTORS PW, INJECTORS DC, EGT #1 and #2, KNOCK LEVEL, DWELL TIME, CURRENT GEAR, BARO PRESSURE, ANALOG #1,#2,#3,#4, ECU TEMPERATURE, OIL PRESSURE, OIL TEMPERATURE, FUEL PRESSURE, ETHANOL CONTENT, FUEL TEMPERATURE, VEHICLE SPEED, FUEL PRESSURE DELTA, FUEL LEVEL, TABLES SET, CHECK ENGINE CODE\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca\u003eCAN BT CONNECTION GUIDE\/EMU BLACK INSTALLATION\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eEMU CAN BT MANUAL\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eVisit the Google Play Store for the app or \u003cstrong\u003e\u003ca\u003ehttp:\/\/www.realdash.net\u003c\/a\u003e\u003c\/strong\u003e for the software on PC\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601503011156,"sku":"SPDEMUBTCB","price":173.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECu-master-can-bluetooth-modul.webp?v=1776856566"},{"product_id":"ecu-master-emu-bluetooth-module","title":"ECU Master EMU bluetooth module","description":"\u003cp\u003e\u003cstrong\u003eECU Master EMU bluetooth module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Bluetooth module allows the transmission of ECUMASTER log data via Bluetooth communication. It also makes it possible to trace all important engine parameters in real time using Android-compatible devices.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere is also a third party Dashboard application available. For more information see http:\/\/www.realdash.net.\u003c\/p\u003e\n\u003cp\u003eFree application available in Google Play store\u003c\/p\u003e\n\u003cp\u003eSerial or CAN version available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLogged channels\u003c\/strong\u003e: RPM, MAP, TPS, IAT, AFR, CLT, LAMBDA, BATTERY VOLTAGE, IGNITION ANGLE, INJECTORS PW, SEC. INJECTORS PW, INJECTORS DC, EGT #1 and #2, KNOCK LEVEL, DWELL TIME, CURRENT GEAR, BARO PRESSURE, ANALOG #1,#2,#3,#4, ECU TEMPERATURE, OIL PRESSURE, OIL TEMPERATURE, FUEL PRESSURE, ETHANOL CONTENT, FUEL TEMPERATURE, VEHICLE SPEED, FUEL PRESSURE DELTA,FUEL LEVEL, TABLES SET ,CHECK ENGINE CODE\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca\u003eManual\u003cbr\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eCanbus PDF\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601503109460,"sku":"ECUM2","price":67.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-bluetooth-modul.webp?v=1776856569"},{"product_id":"ecu-master-emu-black-flying-lead-harness","title":"Ecu Master EMU Black Flying Lead Harness","description":"\u003cp\u003e\u003cstrong\u003eEcu Master EMU Black Flying Lead Wiring Harness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-quality flying lead harness for EMU BLACK with pre-crimped pins on one end, ready to be easily connected to the connectors.\u003cbr\u003eEach wire is labeled with a designation for its specific channel.\u003cbr\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601503371604,"sku":"SPDEMBFL","price":154.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-flying-lead.webp?v=1776856575"},{"product_id":"ecu-master-emu-classic-flying-lead-cable-harness","title":"Ecu Master EMU Classic Flying Lead cable harness","description":"\u003cp\u003e\u003cstrong\u003eEcu Master EMU Classic Flying Lead Wiring Harness\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHigh-quality flying lead harness for EMU Classic with pre-crimped pins on one end, ready to be easily connected to the connectors.\u003cbr\u003eEach wire is labeled with a designation for its specific channel.\u003cbr\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601503404372,"sku":"SPDEMCFL","price":130.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-flying-lead_8cf5dfaf-9d3f-4994-a9eb-250146411929.webp?v=1776856577"},{"product_id":"ecu-master-usb-to-can-module","title":"ECU Master USB to CAN module","description":"\u003cp\u003e\u003cstrong\u003eECU Master USB to CAN Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ECUMASTER USB TO CAN is a USB interface that allows the user to connect to the CANbus network. \u003cbr\u003eIt supports CAN 2.0A and CAN 2.0B standards. \u003cbr\u003eThe device is equipped with an LED status indicator for quick diagnostics and a 120 Ohm terminator that can be enabled or disabled, allowing the user to avoid using external terminators.\u003cbr\u003eECU Master USB to CAN module is used to configure PMU and ADU.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA USB B cable is required to connect to the computer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eUSBtoCAN Manual\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003eDrawings – USB to CAN\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601511891284,"sku":"EMUSBCAN","price":183.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-master-USB-to-CAN.webp?v=1776856675"},{"product_id":"ecu-master-classic-bracket","title":"ECU Master classic bracket","description":"\u003cp\u003e\u003cstrong\u003eECU Master Classic Mounting Bracket\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMount your EMU Classic securely and safely with the ECU Master bracket for EMU! The bracket is made of aluminum, laser-cut, and then CNC bent. Each bracket is then powder-coated for a durable and attractive finish.\u003c\/p\u003e\n\u003cp\u003eNote: \u003cstrong\u003eTHIS BRACKET IS ONLY FOR EMU CLASSIC, NOT EMU BLACK\u003c\/strong\u003e. EMU Black has a mounting hole milled into the box, allowing you to use a 6 mm bolt to attach the ECU\u003cbr\u003eto any surface. A bracket is not required for EMU Black.\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512055124,"sku":"ECUM20","price":38.24,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-EMU-bracket.webp?v=1776856676"},{"product_id":"ecu-master-battery-isolator-deutch-dtm","title":"ECU Master Battery isolator (Deutch DTM)","description":"\u003cp\u003e\u003cstrong\u003eECU Master Battery isolator (Deutch DTM)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no mechanical components, long lifespan and high reliability are ensured.\u003c\/p\u003e\n\u003cp\u003eThe device features built-in protection against alternator load dumping without the need for external components. There is no risk of damage to costly electronics during an emergency shutdown. The isolator is controlled with two external switches and can be turned off with a CAN bus message. The message can be sent from an Ecumaster PMU16 unit upon collision or other events. The unit is configurable via CAN bus.\u003c\/p\u003e\n\u003cp\u003eIt also sends diagnostic information that can be used by other equipment and is valuable during the unit's installation and diagnostics. It is fully protected against overheating and overcurrent. The status of the unit is indicated by a multi-color LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eWeight: 83 g\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 mm x 100 mm x 38.5 mm\u003c\/li\u003e\n\u003cli\u003eVoltage range: 6V – 19V, 28V transient (for 12V vehicle installations only)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -40°C to +125°C\u003c\/li\u003e\n\u003cli\u003eCurrent capacity: 300A continuous, peaks up to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement resolution: 4A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement range: -1000A to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement accuracy: ±10%\u003c\/li\u003e\n\u003cli\u003eInductive load switching capacity: 600mJ\u003c\/li\u003e\n\u003cli\u003eEnclosure: Anodized aluminum, rated IP67\u003c\/li\u003e\n\u003cli\u003eHigh current connections: M8 nickel-plated terminals or Radlok connectors\u003c\/li\u003e\n\u003cli\u003eSignal connection: Deutsch ASX202-06PN (included connector ASX602-06SN included)\u003c\/li\u003e\n\u003cli\u003ePower consumption in energy-saving mode: \u0026lt;1mA\u003c\/li\u003e\n\u003cli\u003ePower consumption in ON mode: ~20mA\u003c\/li\u003e\n\u003cli\u003eEngine shutdown output: 3A, High (VBat), Low (GND) or Hi-Z\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eBattery Isolator Manual v1.1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDrawings – Battery Isolator\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512087892,"sku":"ECUM520","price":5739.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-batteri-isolator.webp?v=1776856678"},{"product_id":"ecu-master-battery-isolator-radlock","title":"ECU Master Battery isolator (Radlock)","description":"\u003cp\u003e\u003cstrong\u003eECU Master Battery isolator (Radlock)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no mechanical components, long lifespan and high reliability are ensured.\u003c\/p\u003e\n\u003cp\u003eThe device features built-in protection against alternator load dumping without the need for external components. There is no risk of damage to costly electronics during an emergency shutdown. The isolator is controlled with two external switches and can be turned off with a CAN bus message. The message can be sent from an Ecumaster PMU16 unit upon collision or other events. The unit is configurable via CAN bus.\u003c\/p\u003e\n\u003cp\u003eIt also sends diagnostic information that can be used by other equipment and is valuable during the unit's installation and diagnostics. It is fully protected against overheating and overcurrent. The status of the unit is indicated by a multi-color LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eWeight: 83 g\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 mm x 100 mm x 38.5 mm\u003c\/li\u003e\n\u003cli\u003eVoltage range: 6V – 19V, 28V transient (for 12V vehicle installations only)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -40°C to +125°C\u003c\/li\u003e\n\u003cli\u003eCurrent capacity: 300A continuous, peaks up to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement resolution: 4A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement range: -1000A to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement accuracy: ±10%\u003c\/li\u003e\n\u003cli\u003eInductive load switching capacity: 600mJ\u003c\/li\u003e\n\u003cli\u003eEnclosure: Anodized aluminum, rated IP67\u003c\/li\u003e\n\u003cli\u003eHigh current connections: M8 nickel-plated terminals or Radlok connectors\u003c\/li\u003e\n\u003cli\u003eSignal connection: Deutsch ASX202-06PN (included connector ASX602-06SN included)\u003c\/li\u003e\n\u003cli\u003ePower consumption in energy-saving mode: \u0026lt;1mA\u003c\/li\u003e\n\u003cli\u003ePower consumption in ON mode: ~20mA\u003c\/li\u003e\n\u003cli\u003eEngine shutdown output: 3A, High (VBat), Low (GND) or Hi-Z\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eBattery Isolator Manual v1.1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDrawings – Battery Isolator\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512776020,"sku":"ECUM519","price":725.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-Battery-isolator-Radlock.webp?v=1776856680"},{"product_id":"ecumaster-adu-5-display-rev2","title":"ECUMASTER ADU 5\" Display Rev2","description":"\u003cp\u003e\u003cstrong\u003eECUMASTER ADU 5\" Display Rev2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eECUMASTER presents the new Racing Dash series with ADU5 and ADU7, designed to provide race drivers with a cost-effective, customizable, and functional dash display with logging capabilities. \u003cbr\u003eFeaturing high-resolution, anti-glare screens and several preconfigured pages, users can easily customize the display of essential data for different racing stages.\u003cbr\u003e\u003cbr\u003ePages and displayed data can be adjusted in real-time using user-friendly software. The ADU units also offer an overlay system to display important alerts and data while showing other information.\u003c\/p\u003e\n\u003cp\u003eADU is an advanced dash display with 15 RGB LEDs that can be used as shift lights and customized for various alerts and functions. \u003cbr\u003eIt has predictive lap timing based on the best reference lap and supports user-configurable timers and thermal cameras to monitor brake disc and tire temperatures. \u003cbr\u003eThe device has two CAN-BUS ports for communication with other devices and is compatible with most ECUs.\u003cbr\u003eThe ADU has high-quality graphics, can log data at up to 500Hz, and comes in a robust CNC-machined housing.\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDownloads and Manuals\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512808788,"sku":"ECUM412b","price":1219.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/atn1024_adu_mockup_duzy.webp?v=1776856681"},{"product_id":"ecu-master-can-bus-lambda","title":"ECU Master Can-bus lambda","description":"\u003cp\u003e\u003cstrong\u003eECU Master Can-bus Lambda\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster Lambda for CAN controller is a compact unit that controls a Bosch LSU 4.9 wideband oxygen sensor and transmits lambda readings via CAN-BUS. It has two programmable 0-5V analog signal wires and uses a high-quality digital control unit for accurate handling and calculation of Lambda and AFR. Multiple units can be installed on the same CAN-BUS for increased flexibility.\u003c\/p\u003e\n\n\u003cli\u003eSupport for Bosch LSU 4.9\u003c\/li\u003e\n\u003cli\u003eOperating voltage range: 9 - 16V\u003c\/li\u003e\n\u003cli\u003ePower consumption: up to 3A (during heating)\u003c\/li\u003e\n\u003cli\u003eIP65 enclosure\u003c\/li\u003e\n\u003cli\u003e2 programmable analog outputs 0-5V\u003c\/li\u003e\n\u003cli\u003eCommunication and configuration: CAN 2.0A\/B\u003cbr\u003e\u003cstrong\u003e\u003ca\u003e\u003cbr\u003elambda_to_can_manual\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513496916,"sku":"ECUM517","price":260.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-can-bus-lambda.webp?v=1776856683"},{"product_id":"ecu-master-dbw-module","title":"ECU Master DBW module","description":"\u003cp\u003e\u003cstrong\u003eECU Master DBW Module\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA module with four analog inputs and CAN-BUS that enables communication with the car's internal systems and instrument panels.\u003cbr\u003eConnects directly to CLASSIC's expander port.\u003c\/p\u003e\n\u003cp\u003eMaximum 7A H-bridge output current, where only one EMU output is needed to control the electronic throttle.\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003edbwManual-EN\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513529684,"sku":"ECUM16","price":144.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-DBW-modul-EMU.webp?v=1776856684"},{"product_id":"ecu-master-gear-indicator","title":"ECU Master Gear indicator","description":"\u003cp\u003e\u003cstrong\u003eECU Master Gear Indicator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe digital gear indicator is designed to work with an original or aftermarket ECU to display the current gear with an optional shift light.\u003cbr\u003eGear calculations are made based on vehicle speed and engine RPM via OBD2 or CAN, or by using a transmission position sensor.\u003cbr\u003eThe unit is fully configurable via CAN BUS (communication, shift points per gear, etc.) and can be used with virtually any CANBUS-based ECU.\u003cbr\u003eThanks to the large and bright display, the indicated gear is readable in all lighting conditions. The display brightness can be controlled via CAN or with a potentiometer (when the transmission position sensor is not connected).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eReads gear via CAN, OBDII, or analog gear sensor.\u003c\/li\u003e\n\u003cli\u003e3 RGB LED customizable shift light.\u003c\/li\u003e\n\u003cli\u003eEasy-to-read large display (size).\u003c\/li\u003e\n\u003cli\u003eConfigurable via CAN BUS.\u003c\/li\u003e\n\u003cli\u003eFree software updates.\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDigital_gear_indicator_manual\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003eDrawings – Digital Gear Indicator\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513693524,"sku":"ECUM522","price":406.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/74A6585_2048x2asfaewfw453562048.webp?v=1776856686"},{"product_id":"ecu-master-edl-1-datalogger-bt","title":"ECU Master EDL-1 Datalogger + BT","description":"\u003cp\u003e\u003cstrong\u003eECU Master EDL-1 Datalogger + BT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EDL-1 datalogger is a \"must-have\" device for anyone using EMU, EMU CLASSIC, and EMU BLACK. By utilizing serial communication, this device can log over 200 data channels at a frequency of 25Hz.\u003c\/p\u003e\n\u003cp\u003eThe popular SDHC card with FAT32 file system makes it easy and quick to read data on a PC. The average data rate allows for recording about 1 hour of driving per 1 GB, and a 4GB memory card is included.\u003c\/p\u003e\n\u003cp\u003eFor timestamping, there is a built-in clock powered by a battery-operated RTC.\u003c\/p\u003e\n\u003cp\u003eAdditionally, the EDL-1 is equipped with a Bluetooth module to communicate with an Android tablet.\u003c\/p\u003e\n\n\u003cli\u003eWorks with EMU and EMU BLACK via serial communication.\u003c\/li\u003e\n\u003cli\u003e4GB SDHC memory card with FAT32 file system.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bluetooth module.\u003c\/li\u003e\n\u003cli\u003eCustom anodized aluminum housing with two LED lights indicating device status, memory card transfer, and Bluetooth connection.\u003cbr\u003e \u003cbr\u003e\u003ca\u003e\u003cstrong\u003eEDL-1 Manual\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003cbr\u003e\u003ca\u003eFirmware 1.12\u003cbr\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca\u003e\u003cstrong\u003eDrawings – EDL-1\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513726292,"sku":"ECUM10","price":212.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-data-logger-EDL-1.webp?v=1776856687"},{"product_id":"ecu-master-gps-module","title":"ECU Master GPS module","description":"\u003cp\u003e\u003cstrong\u003eECU Master GPS Module V2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster GPS module ensures high-precision position tracking with an update frequency of 25 Hz. The module can use four navigation systems simultaneously: GPS, GLONASS, Galileo, and BeiDou.\u003cbr\u003eAn external, active antenna with a magnetic base is included in the module.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThanks to a built-in 3-axis accelerometer and gyroscope, the device can provide information about:\u003c\/strong\u003e\u003cbr\u003eSpeed\u003cbr\u003ePosition\u003cbr\u003eHeading\u003cbr\u003eAltitude\u003cbr\u003eAccelerations and angular velocities.\u003cbr\u003e\u003cbr\u003eAll GPS data is transmitted via CAN bus. The GPS module is designed to be used with ADU display\/log and enables real-time lap time measurement, predictive timing, as well as post-session data analysis with a display of the track.\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eGPS to CAN V2 – User Manual\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513791828,"sku":"ECUM4121","price":406.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-GPS-Modul.webp?v=1776856689"},{"product_id":"ecu-master-rotary-switch","title":"ECU Master Rotary switch","description":"\u003cp\u003e\u003cstrong\u003eECU Master Rotary Switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 8-step ECU Master Rotary switch can be used to control various ECU functions such as Traction Control and Boost Control settings.\u003cbr\u003eInstallation is simple: connect 5V power, sensor ground, and output signal. The rotary switches can be connected to any available analog input on the EMU, EMU Black, or PMU16.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eMounting hole size: 8.8 mm to 9 mm (8.8 mm thread outer diameter)\u003c\/li\u003e\n\u003cli\u003ePosition pins for fixed mounting position: 3 mm (W) x 0.60 mm (Thickness)\u003c\/li\u003e\n\u003cli\u003eDistance from mounting hole center to position pin: ~8 mm\u003c\/li\u003e\n\u003cli\u003eBoard size: 22.75 mm x 21.15 mm\u003c\/li\u003e\n\u003cli\u003eDepth from mounting surface to back of the board: 12 mm (including space for solder pins)\u003c\/li\u003e\n\u003cli\u003eKnob: 16 mm (L) x 15 mm (Outer diameter)\u003c\/li\u003e\n\u003cli\u003eTotal height from solder pins on the back of the board to the top of the knob: ~32 mm\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601513857364,"sku":"ECUMRS","price":33.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-rotary-switch.webp?v=1776856691"},{"product_id":"ecu-master-keyboard-12-buttons","title":"ECU Master Keyboard 12 buttons","description":"\u003cp\u003e\u003cstrong\u003eECU Master Keypad 12 Buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard.\u003c\/p\u003e\n\u003cp\u003eThe behavior of each individual key is fully configurable using the EMU BLACK or PMU client software.\u003c\/p\u003e\n\u003cp\u003eThe unique idea of a replacement system for individual inserts means that it is easy to reorganize the keyboard layout with the existing insert without affecting the appearance. Additionally, custom inserts can be provided. \u003cstrong\u003ePlastic inserts with laser marking are not included in the keyboard packaging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eCAN-bus compatible keyboard.\u003c\/li\u003e\n\u003cli\u003eSupport for CAN bus speeds of 125 kbps, 250 kbps, 500 kbps, and 1000 kbps.\u003c\/li\u003e\n\u003cli\u003eWorks with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards).\u003c\/li\u003e\n\u003cli\u003eFully customizable.\u003c\/li\u003e\n\u003cli\u003eIP 67 rated.\u003cbr\u003e\u003cbr\u003eManual: \u003ca\u003e\u003cstrong\u003ecanKeyboard.pdf\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601514119508,"sku":"ECUM512","price":406.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-Can-keyboard-12.webp?v=1776856691"},{"product_id":"ecu-master-keyboard-8-buttons","title":"ECU Master Keyboard 8 buttons","description":"\u003cp\u003e\u003cstrong\u003eECU Master Keypad 8 Buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard.\u003c\/p\u003e\n\u003cp\u003eThe behavior of each individual key is fully configurable using the EMU BLACK or PMU client software.\u003c\/p\u003e\n\u003cp\u003eThe unique idea of a replacement system for individual inserts means that it is easy to reorganize the keyboard layout with the existing insert without affecting the appearance. Additionally, custom inserts can be provided. \u003cstrong\u003ePlastic inserts with laser marking are not included in the keyboard packaging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eCAN-bus compatible keyboard.\u003c\/li\u003e\n\u003cli\u003eSupport for CAN bus speeds of 125 kbps, 250 kbps, 500 kbps, and 1000 kbps.\u003c\/li\u003e\n\u003cli\u003eWorks with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards).\u003c\/li\u003e\n\u003cli\u003eFully customizable.\u003c\/li\u003e\n\u003cli\u003eIP 67 rated.\u003cbr\u003e\u003cbr\u003eManual: \u003ca\u003e\u003cstrong\u003ecanKeyboard.pdf\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601514185044,"sku":"ECUM508","price":386.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-keyboard-8-knappar.webp?v=1776856693"},{"product_id":"ecu-master-keyboard-4-buttons","title":"ECU Master Keyboard 4 buttons","description":"\u003cp\u003e\u003cstrong\u003eECU Master Keypad 4 Buttons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt-in LED lights indicate the button status (RGB colors) and also serve as backlighting for the keyboard.\u003c\/p\u003e\n\u003cp\u003eThe behavior of each individual key is fully configurable using the EMU BLACK or PMU client software.\u003c\/p\u003e\n\u003cp\u003eThe unique idea of a replacement system for individual inserts means that it is easy to reorganize the keyboard layout with the existing insert without affecting the appearance. Additionally, custom inserts can be provided. \u003cstrong\u003ePlastic inserts with laser marking are not included in the keyboard packaging.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eCAN-bus compatible keyboard.\u003c\/li\u003e\n\u003cli\u003eSupport for CAN bus speeds of 125 kbps, 250 kbps, 500 kbps, and 1000 kbps.\u003c\/li\u003e\n\u003cli\u003eWorks with EMU BLACK (1 keyboard) and PMU devices (up to 2 keyboards).\u003c\/li\u003e\n\u003cli\u003eFully customizable.\u003c\/li\u003e\n\u003cli\u003eIP 67 rated.\u003cbr\u003e\u003cbr\u003eManual: \u003ca\u003e\u003cstrong\u003ecanKeyboard.pdf\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601514250580,"sku":"ECUM504","price":338.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-Keyboard-4-knappar.webp?v=1776856695"},{"product_id":"ecu-master-emu-classic-connector-kit","title":"ECU Master EMU Classic connector kit","description":"\u003cp\u003e\u003cstrong\u003eECU Master EMU Classic Connector Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ECU Master EMU Classic Connector Kit includes a set of gray and black connector housings and 48 terminals for ECUMaster EMU Classic. The kit includes a black 24-pin connector, a gray 24-pin connector, and a complete set of terminals for easy installation and reliable connections.\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601515626836,"sku":"ECU-M-CLASSIC-CK","price":25.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/connector-kit-classic.webp?v=1776856718"},{"product_id":"ecu-master-emu-black-connector-kit","title":"ECU Master EMU Black connector kit","description":"\u003cp\u003e\u003cstrong\u003eECU Master EMU Black Connector Kit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe EMU Black Connector Kit includes a set of gray and black connector housings and 63 terminals for ECUMaster EMU Black.\u003c\/p\u003e\n\u003cp\u003eThe kit includes a black 39-pin connector, a gray 24-pin connector, and a complete set of terminals for easy installation and reliable connections.\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601515692372,"sku":"ECU-M-BLACK-CK","price":33.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/connector-kit-black.webp?v=1776856719"},{"product_id":"ecumaster-map-sensor-map-400","title":"ECUMASTER Map-sensor MAP-400","description":"\u003cp\u003e\u003cstrong\u003eECUMASTER MAP Sensor MAP-400\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster 400kPa MAP (Manifold Absolute Pressure) sensor is a pressure sensor that delivers precise and stable performance at an affordable price. It operates by converting absolute pressure into an electrical voltage signal.\u003cbr\u003eThis versatile sensor can accurately measure pressure, from vacuum conditions to \"boost pressure\" up to 300 kPa, making it an ideal choice for various vehicle applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eSupply voltage: 5.0 V\u003c\/li\u003e\n\u003cli\u003eSupply current: \u0026lt; 10 mA\u003c\/li\u003e\n\u003cli\u003ePressure range: 20 to 400 kPa\u003c\/li\u003e\n\u003cli\u003eFull-scale output: 4.6 V\u003c\/li\u003e\n\u003cli\u003eSensitivity: 12.1 mV\/kPa\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -25 °C to 125 °C\u003c\/li\u003e\n\u003cli\u003eAccuracy: +\/- 1.5%\u003c\/li\u003e\n\u003cli\u003eEnclosure: PA6-GF15 plastic mold\u003c\/li\u003e\n\u003cli\u003eIP67\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 1600 kPa (232 psi)\u003c\/li\u003e\n\u003cli\u003eMaximum output voltage: 5.5 V\u003c\/li\u003e\n\u003cli\u003eMaximum load current: +\/- 0.5 mA\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eMAP-400 Datasheet\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601523753300,"sku":"ECUM64","price":76.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECUMASTER-MAP-400.webp?v=1776856839"}],"url":"https:\/\/rocketspeedshop.com\/collections\/other-modules.oembed","provider":"Rocket Speed Shop","version":"1.0","type":"link"}