{"title":"Hose ends quick release - motorsport","description":"\u003cp\u003e\u003cstrong\u003eMost AN parts are on our own shelf in Estonia\u003c\/strong\u003e, even if they show \"partner stock\". Message us what you need and we'll confirm availability ASAP.\u003c\/p\u003e","products":[{"product_id":"an4-hose-end-straight-quick-connect","title":"AN4 hose end straight Quick-Connect","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/CSfcXZSHr2M?si=sYZ4fwoCHIV2PIyP\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595157844,"sku":"SPD-QC-001","price":22.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-hose-end-straight-Quick-Connect_black.webp?v=1776074593"},{"product_id":"an6-hose-end-straight-quick-connect","title":"AN6 hose end straight Quick-Connect","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/CSfcXZSHr2M?si=sYZ4fwoCHIV2PIyP\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595190612,"sku":"SPD-QC-002","price":23.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-hose-end-straight-Quick-Connect_black.webp?v=1776074594"},{"product_id":"an8-hose-end-straight-quick-connect","title":"AN8 hose end straight Quick-Connect","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/CSfcXZSHr2M?si=sYZ4fwoCHIV2PIyP\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595223380,"sku":"SPD-QC-003","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-hose-end-straight-Quick-Connect_black.webp?v=1776074596"},{"product_id":"an10-hose-end-straight-quick-connect","title":"AN10 hose end straight Quick-Connect","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/CSfcXZSHr2M?si=sYZ4fwoCHIV2PIyP\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595518292,"sku":"SPD-QC-004","price":27.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-hose-end-straight-Quick-Connect_black.webp?v=1776074597"},{"product_id":"an12-hose-end-straight-quick-connect","title":"AN12 hose end straight Quick-Connect","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/CSfcXZSHr2M?si=sYZ4fwoCHIV2PIyP\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595551060,"sku":"SPD-QC-005","price":29.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12hose-end-straight-Quick-Connect_black.webp?v=1776074598"},{"product_id":"an4-30-quick-connect-hose-end","title":"AN4 30° Quick-Connect hose end","description":"\u003ch2\u003eAN8 90° PTFE Quick-Connect Hose Fitting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ea-HFWVy6xY?si=8_LlvNbIs7dUeV_0\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595583828,"sku":"SPD-QC-006","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-30-Quick-Connect-hose-end_black.webp?v=1776074599"},{"product_id":"an6-30-quick-connect-hose-end","title":"AN6 30° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ea-HFWVy6xY?si=8_LlvNbIs7dUeV_0\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595616596,"sku":"SPD-QC-007","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-30-Quick-Connect-hose-end_black.webp?v=1776074600"},{"product_id":"an8-30-quick-connect-hose-end","title":"AN8 30° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ea-HFWVy6xY?si=8_LlvNbIs7dUeV_0\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595682132,"sku":"SPD-QC-008","price":29.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-30-Quick-Connect-hose-end_black.webp?v=1776074601"},{"product_id":"an10-30-quick-connect-hose-end","title":"AN10 30° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ea-HFWVy6xY?si=8_LlvNbIs7dUeV_0\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595747668,"sku":"SPD-QC-009","price":31.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-30-Quick-Connect-hose-end_black.webp?v=1776074602"},{"product_id":"an12-30-quick-connect-hose-end","title":"AN12 30° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/ea-HFWVy6xY?si=8_LlvNbIs7dUeV_0\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595780436,"sku":"SPD-QC-010","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-30-Quick-Connect-hose-end_black.webp?v=1776074603"},{"product_id":"an4-45-quick-connect-hose-end","title":"AN4 45° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kayw-TJlP24?si=Wcn-anAfbyvU0a_P\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595813204,"sku":"SPD-QC-011","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-45-Quick-Connect-Quick-Connect-hose-end_Black.webp?v=1776074604"},{"product_id":"an6-45-quick-connect-hose-end","title":"AN6 45° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kayw-TJlP24?si=Wcn-anAfbyvU0a_P\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595845972,"sku":"SPD-QC-012","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-45-Quick-Connect-Quick-Connect-hose-end_Black.webp?v=1776074605"},{"product_id":"an8-45-quick-connect-hose-end","title":"AN8 45° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kayw-TJlP24?si=Wcn-anAfbyvU0a_P\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595878740,"sku":"SPD-QC-013","price":29.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-45-Quick-Connect-Quick-Connect-hose-end_Black.webp?v=1776074608"},{"product_id":"an10-45-quick-connect-quick-connect-hose-end","title":"AN10 45° Quick-Connect Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kayw-TJlP24?si=Wcn-anAfbyvU0a_P\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595944276,"sku":"SPD-QC-014","price":31.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-45-Quick-Connect-Quick-Connect-hose-end_Black.webp?v=1776074608"},{"product_id":"an12-45-quick-connect-hose-end","title":"AN12 45° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Kayw-TJlP24?si=Wcn-anAfbyvU0a_P\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523595977044,"sku":"SPD-QC-015","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-45-Quick-Connect-Quick-Connect-hose-end_Black.webp?v=1776074610"},{"product_id":"an4-60-quick-connect-hose-end","title":"AN4 60° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523596042580,"sku":"SPD-QC-016","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-60-Quick-Connect-hose-end_black.webp?v=1776074612"},{"product_id":"an6-60-quick-connect-hose-end","title":"AN6 60° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523596304724,"sku":"SPD-QC-017","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-60-Quick-Connect-hose-end_black.webp?v=1776074614"},{"product_id":"an8-60-quick-connect-hose-end","title":"AN8 60° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523596763476,"sku":"SPD-QC-018","price":29.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-60-Quick-Connect-hose-end_black.webp?v=1776074615"},{"product_id":"an10-60-quick-connect-hose-end","title":"AN10 60° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523597222228,"sku":"SPD-QC-019","price":31.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-60-Quick-Connect-hose-end_black.webp?v=1776074617"},{"product_id":"an12-60-quick-connect-hose-end","title":"AN12 60° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523597910356,"sku":"SPD-QC-020","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-60-Quick-Connect-hose-end_black.webp?v=1776074618"},{"product_id":"an4-90-quick-connect-hose-end","title":"AN4 90° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/x09ohLo6vLw?si=sZcL_ihsoZaObkir\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523597943124,"sku":"SPD-QC-021","price":25.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-90-Quick-Connect-hose-end_black.webp?v=1776074620"},{"product_id":"an6-90-quick-connect-hose-end","title":"AN6 90° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/x09ohLo6vLw?si=sZcL_ihsoZaObkir\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523598401876,"sku":"SPD-QC-022","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-90-Quick-Connect-hose-end_black.webp?v=1776074621"},{"product_id":"an8-90-quick-connect-hose-end","title":"AN8 90° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/x09ohLo6vLw?si=sZcL_ihsoZaObkir\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523598565716,"sku":"SPD-QC-023","price":29.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-90-Quick-Connect-hose-end_black.webp?v=1776074622"},{"product_id":"an10-90-quick-connect-hose-end","title":"AN10 90° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/x09ohLo6vLw?si=sZcL_ihsoZaObkir\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523598598484,"sku":"SPD-QC-024","price":31.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-90-Quick-Connect-hose-end_black.webp?v=1776074623"},{"product_id":"an12-90-quick-connect-hose-end","title":"AN12 90° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/x09ohLo6vLw?si=sZcL_ihsoZaObkir\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523598795092,"sku":"SPD-QC-025","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-90-Quick-Connect-hose-end_black.webp?v=1776074624"},{"product_id":"an4-120-quick-connect-hose-end","title":"AN4 120° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YH0GL1Cx_us?si=XO4Lm5EJCOSmWQfv\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523600171348,"sku":"SPD-QC-026","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-120-Quick-Connect-hose-end_black.webp?v=1776074625"},{"product_id":"an6-120-quick-connect-hose-end","title":"AN6 120° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YH0GL1Cx_us?si=XO4Lm5EJCOSmWQfv\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523600400724,"sku":"SPD-QC-027","price":28.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-120-Quick-Connect-hose-end_black.webp?v=1776074626"},{"product_id":"an8-120-quick-connect-hose-end","title":"AN8 120° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YH0GL1Cx_us?si=XO4Lm5EJCOSmWQfv\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523600433492,"sku":"SPD-QC-028","price":32.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-120-Quick-Connect-hose-end_black.webp?v=1776074627"},{"product_id":"an10-120-quick-connect-hose-end","title":"AN10 120° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YH0GL1Cx_us?si=XO4Lm5EJCOSmWQfv\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523600499028,"sku":"SPD-QC-029","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-120-Quick-Connect-hose-end_black.webp?v=1776074628"},{"product_id":"an12-120-quick-connect-hose-end","title":"AN12 120° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/YH0GL1Cx_us?si=XO4Lm5EJCOSmWQfv\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523600925012,"sku":"SPD-QC-030","price":36.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-120-Quick-Connect-hose-end_black.webp?v=1776074630"},{"product_id":"an4-150-quick-connect-hose-end","title":"AN4 150° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I5fLQxOuuec?si=5TE_0JjpJcVvWp0C\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523601088852,"sku":"SPD-QC-031","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-150-Quick-Connect-hose-end_black.webp?v=1776074630"},{"product_id":"an6-150-quick-connect-hose-end","title":"AN6 150° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I5fLQxOuuec?si=5TE_0JjpJcVvWp0C\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523601154388,"sku":"SPD-QC-032","price":28.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-150-Quick-Connect-hose-end_black.webp?v=1776074631"},{"product_id":"an8-150-quick-connect-hose-end","title":"AN8 150° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I5fLQxOuuec?si=5TE_0JjpJcVvWp0C\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523601219924,"sku":"SPD-QC-033","price":32.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-150-Quick-Connect-hose-end_black.webp?v=1776074633"},{"product_id":"an10-150-quick-connect-hose-end","title":"AN10 150° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I5fLQxOuuec?si=5TE_0JjpJcVvWp0C\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523601416532,"sku":"SPD-QC-034","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-150-Quick-Connect-hose-end_black.webp?v=1776074634"},{"product_id":"an12-150-quick-connect-hose-end","title":"AN12 150° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/I5fLQxOuuec?si=5TE_0JjpJcVvWp0C\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523602006356,"sku":"SPD-QC-035","price":36.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-150-Quick-Connect-hose-end_black.webp?v=1776074635"},{"product_id":"an4-180-quick-connect-hose-end","title":"AN4 180° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_e7onRbamgM?si=RsZzly_Jgg8K4J19\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523602202964,"sku":"SPD-QC-036","price":26.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN4-180-Quick-Connect-hose-end_black.webp?v=1776074636"},{"product_id":"an6-180-quick-connect-hose-end","title":"AN6 180° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_e7onRbamgM?si=RsZzly_Jgg8K4J19\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523602235732,"sku":"SPD-QC-037","price":28.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN6-180-Quick-Connect-hose-end_black.webp?v=1776074636"},{"product_id":"an8-180-quick-connect-hose-end","title":"AN8 180° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_e7onRbamgM?si=RsZzly_Jgg8K4J19\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523602858324,"sku":"SPD-QC-038","price":32.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN8-180-Quick-Connect-hose-end_black.webp?v=1776074638"},{"product_id":"an10-180-quick-connect-hose-end","title":"AN10 180° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_e7onRbamgM?si=RsZzly_Jgg8K4J19\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523603022164,"sku":"SPD-QC-039","price":34.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-180-Quick-Connect-hose-end_black.webp?v=1776074639"},{"product_id":"an12-180-quick-connect-hose-end","title":"AN12 180° Quick-Connect hose end","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_e7onRbamgM?si=RsZzly_Jgg8K4J19\" width=\"100%\" height=\"315\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523603054932,"sku":"SPD-QC-040","price":36.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-180-Quick-Connect-hose-end_black.webp?v=1776074640"},{"product_id":"an12-straight-quick-connect-adapter-male","title":"AN12 Straight Quick-Connect Adapter Male","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523605479764,"sku":"SPD-QC-093","price":16.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-Straight-Quick-Connect-Adapter-Male.webp?v=1776074678"},{"product_id":"an10-straight-quick-connect-adapter-an10-orb","title":"AN10 Straight Quick-Connect Adapter - AN10 ORB","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523606954324,"sku":"SPD-QC-101","price":13.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN10-Straight-Quick-Connect-Adapter---AN10-ORB.webp?v=1776074687"},{"product_id":"an12-straight-quick-connect-adapter-female","title":"AN12 Straight Quick-Connect Adapter Female","description":"\u003cp\u003e\u003cstrong\u003eSPD’s motorsport series of AN quick-connect fittings is developed for maximum reliability and to completely eliminate the risk of leakage.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fittings can be connected and disconnected quickly and easily without tools, saving valuable time during service, maintenance, and pit work.\u003c\/p\u003e\n\u003cp\u003eThe quick-connect mechanism is engineered for the highest possible level of reliability.\u003c\/p\u003e\n\u003cp\u003eOne half features machined locking lugs and guide pins that securely engage with the opposite half, which contains matching grooves with a mechanical positive-lock design.\u003c\/p\u003e\n\u003cp\u003eThis means the AN fitting locks automatically when pushed together. To disconnect, both axial pressure and rotation are required simultaneously, completely preventing accidental separation.\u003c\/p\u003e\n\u003cp\u003eMany other quick-release AN fittings on the market use small locking balls as the retention mechanism. While this design may work initially, it often becomes unreliable when exposed to dust, dirt, or drying, which can prevent the balls from moving freely and locking correctly. The result can be an AN quick-connect that appears locked but separates over time, leading to a fully open leak.\u003c\/p\u003e\n\u003cp\u003eThe SPD design completely avoids this issue. The locking mechanism is purely mechanical, clearly defined, and externally visible. It is far less affected by contamination or wear. You can instantly see that the fitting is securely connected.\u003c\/p\u003e\n\u003cp\u003eInternal sealing is achieved using dual Viton O-rings, making these AN fittings highly resistant to aggressive fuels such as ethanol (E85, E100). They are equally suitable for gasoline, diesel, oil, coolant, and air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSee the listed Quick-Connect accessories below. These are required to complete the connection and make it ready for use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFemale:\u003c\/strong\u003e\u003cbr\u003eScrews into other AN or JIC fittings and seals via the 37° flare, meaning no additional gasket or seal is required. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORB (O-ring Boss):\u003c\/strong\u003e\u003cbr\u003eScrews into threaded AN or JIC ports and seals against a flat surface using an O-ring, rather than a flare. The opposite end connects to a Quick-Connect hose fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHose fitting:\u003c\/strong\u003e\u003cbr\u003eConnects to AN-hose. The opposite end connects to a Quick-Connect adapter.\u003c\/p\u003e","brand":"SPD Performance Parts","offers":[{"title":"Default Title","offer_id":55523607740756,"sku":"SPD-QC-106","price":17.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/AN12-Straight-Quick-Connect-Adapter-Female.webp?v=1776074692"}],"url":"https:\/\/rocketspeedshop.com\/collections\/hose-ends-quick-release-motorsport.oembed?page=2","provider":"Rocket Speed Shop","version":"1.0","type":"link"}