{"title":"ECUMaster PMU \u0026 isolator","description":"","products":[{"product_id":"ecu-master-pmu-16dl","title":"ECU master PMU-16DL","description":"\u003cp\u003e\u003cstrong\u003eECU Master PMU-16DL\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA few decades ago, the most critical electronic components in a race car were the ignition coil and distributor. Today, race cars are equipped with advanced engine management systems, braking systems, paddle shifters, data loggers, radios, electric pumps, fans, and lighting. Each component must be controlled at the right time, and it is crucial that all systems have protection to prevent damage or fire.\u003c\/p\u003e\n\u003cp\u003eTraditionally, fuses and relays have been used to manage these functions, but they come with several disadvantages, such as complicated wiring harnesses, sensitivity to vibrations and temperature changes, and difficulties with diagnostics.\u003c\/p\u003e\n\u003cp\u003eThese challenges can be effectively addressed with our intelligent power management unit (PMU). Our latest PMU unit represents the latest in technology and offers 16 high-current outputs to power lighting, fans, pumps, and more. It ensures constant voltage monitoring and short-circuit protection on all channels, completely eliminating the need for fuses and relays.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Information:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eTemperature Range: AECQ100 GRADE1 (-40 to +125?C)\u003c\/li\u003e\n\u003cli\u003eCPU: 32-bit automotive processor, 90MIPS\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6-22V, transient immunity per ISO 7637\u003c\/li\u003e\n\u003cli\u003eEnclosure: IP 60, custom CNC-machined aluminum\u003c\/li\u003e\n\u003cli\u003eSize (mm) and Weight (g): 131x112x32.5, 370g\u003c\/li\u003e\n\u003cli\u003eConnections: 1 x 39-pin automotive connector,\u003cbr\u003e1 x M6 bolt for battery connection\u003c\/li\u003e\n\u003cli\u003ePC Communication: CAN (ECUMASTER USBtoCAN, PEAK CAN, KVASER)\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eOUTPUTS:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eHigh-current outputs: 10 x 25A (continuous), 6 x 15A (continuous) with overcurrent and\u003c\/li\u003e\n\u003cli\u003eoverheating protection. The outputs can be paired to increase the continuous current capacity.\u003c\/li\u003e\n\u003cli\u003eCurrent and voltage are measured for each output.\u003c\/li\u003e\n\u003cli\u003eTotal current output: 150A continuous\u003c\/li\u003e\n\u003cli\u003eStep for output current control: 100mA\u003c\/li\u003e\n\u003cli\u003eWiper output: Dedicated output with wiper braking function\u003c\/li\u003e\n\u003cli\u003e+5V: Monitored 5V, 500mA output to power external sensors.\u003c\/li\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINPUTS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eAnalog inputs: 16 inputs, 10 bits resolution, 0-5V (protected), with software-selectable 10K\u003c\/li\u003e\n\u003cli\u003eOhm pull-up and pull-down.\u003c\/li\u003e\n\u003cli\u003eCAN keyboard: 2 x Ecumaster keyboards (4, 6, 8, 12 keys).\u003c\/li\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eOTHER:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eOutput status indication: 16 bi-color LEDs\u003c\/li\u003e\n\u003cli\u003eAccelerometer\/Gyroscope: 3D accelerometer with 3D gyroscope for logging and\u003c\/li\u003e\n\u003cli\u003ecrash detection. Real-time clock: Yes, supercapacitor for backup power (up to 3 days)\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eCAN BUS:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eCAN interface: 2 x CAN2.0 A\/B\u003c\/li\u003e\n\u003cli\u003eCAN standard: CAN2.0 A\/B – 125, 250, 500, 1000 kbps\u003c\/li\u003e\n\u003cli\u003eIn\/Out current: User-defined with bit masking, up to 100 input messages\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eLOGGING:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eLogging memory: 256 Mbyte\u003c\/li\u003e\n\u003cli\u003eLogging speed: Variable, defined per channel, up to 500 Hz\u003c\/li\u003e\n\n\u003cp\u003e\u003cstrong\u003eLinks and Manuals:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003ePMU software package 101.2 (2024\/10\/24)\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003ePMU software change log\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003ca\u003ePMU User Manual 101.1.1 (2024\/10\/08)\u003cbr\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003ca\u003e\u003cstrong\u003ePMU-16 Pinout 1.1 (2023\/10\/06)\u003cbr\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003ca\u003e\u003cstrong\u003ePMUs comparison table\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601502880084,"sku":"SPDPMU16DL","price":1517.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ecu-master-PMU.webp?v=1776856561"},{"product_id":"ecu-master-battery-isolator-deutch-dtm","title":"ECU Master Battery isolator (Deutsch DTM)","description":"\u003cp\u003e\u003cstrong\u003eECU Master Battery isolator (Deutch DTM)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no mechanical components, long lifespan and high reliability are ensured.\u003c\/p\u003e\n\u003cp\u003eThe device features built-in protection against alternator load dumping without the need for external components. There is no risk of damage to costly electronics during an emergency shutdown. The isolator is controlled with two external switches and can be turned off with a CAN bus message. The message can be sent from an Ecumaster PMU16 unit upon collision or other events. The unit is configurable via CAN bus.\u003c\/p\u003e\n\u003cp\u003eIt also sends diagnostic information that can be used by other equipment and is valuable during the unit's installation and diagnostics. It is fully protected against overheating and overcurrent. The status of the unit is indicated by a multi-color LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eWeight: 83 g\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 mm x 100 mm x 38.5 mm\u003c\/li\u003e\n\u003cli\u003eVoltage range: 6V – 19V, 28V transient (for 12V vehicle installations only)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -40°C to +125°C\u003c\/li\u003e\n\u003cli\u003eCurrent capacity: 300A continuous, peaks up to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement resolution: 4A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement range: -1000A to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement accuracy: ±10%\u003c\/li\u003e\n\u003cli\u003eInductive load switching capacity: 600mJ\u003c\/li\u003e\n\u003cli\u003eEnclosure: Anodized aluminum, rated IP67\u003c\/li\u003e\n\u003cli\u003eHigh current connections: M8 nickel-plated terminals or Radlok connectors\u003c\/li\u003e\n\u003cli\u003eSignal connection: Deutsch ASX202-06PN (included connector ASX602-06SN included)\u003c\/li\u003e\n\u003cli\u003ePower consumption in energy-saving mode: \u0026lt;1mA\u003c\/li\u003e\n\u003cli\u003ePower consumption in ON mode: ~20mA\u003c\/li\u003e\n\u003cli\u003eEngine shutdown output: 3A, High (VBat), Low (GND) or Hi-Z\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eBattery Isolator Manual v1.1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDrawings – Battery Isolator\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512087892,"sku":"ECUM520","price":5739.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-batteri-isolator.webp?v=1776856678"},{"product_id":"ecu-master-battery-isolator-radlock","title":"ECU Master Battery isolator (Radlock)","description":"\u003cp\u003e\u003cstrong\u003eECU Master Battery isolator (Radlock)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ecumaster Battery Isolator is a motorsport master relay device designed for FIA-compliant battery isolation and engine shut-off. The unit is built for tough motorsport environments and weighs only 83 g. With a fully solid-state design and no mechanical components, long lifespan and high reliability are ensured.\u003c\/p\u003e\n\u003cp\u003eThe device features built-in protection against alternator load dumping without the need for external components. There is no risk of damage to costly electronics during an emergency shutdown. The isolator is controlled with two external switches and can be turned off with a CAN bus message. The message can be sent from an Ecumaster PMU16 unit upon collision or other events. The unit is configurable via CAN bus.\u003c\/p\u003e\n\u003cp\u003eIt also sends diagnostic information that can be used by other equipment and is valuable during the unit's installation and diagnostics. It is fully protected against overheating and overcurrent. The status of the unit is indicated by a multi-color LED light.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cli\u003eWeight: 83 g\u003c\/li\u003e\n\u003cli\u003eDimensions: 50 mm x 100 mm x 38.5 mm\u003c\/li\u003e\n\u003cli\u003eVoltage range: 6V – 19V, 28V transient (for 12V vehicle installations only)\u003c\/li\u003e\n\u003cli\u003eOperating temperature range: -40°C to +125°C\u003c\/li\u003e\n\u003cli\u003eCurrent capacity: 300A continuous, peaks up to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement resolution: 4A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement range: -1000A to 1000A\u003c\/li\u003e\n\u003cli\u003eCurrent measurement accuracy: ±10%\u003c\/li\u003e\n\u003cli\u003eInductive load switching capacity: 600mJ\u003c\/li\u003e\n\u003cli\u003eEnclosure: Anodized aluminum, rated IP67\u003c\/li\u003e\n\u003cli\u003eHigh current connections: M8 nickel-plated terminals or Radlok connectors\u003c\/li\u003e\n\u003cli\u003eSignal connection: Deutsch ASX202-06PN (included connector ASX602-06SN included)\u003c\/li\u003e\n\u003cli\u003ePower consumption in energy-saving mode: \u0026lt;1mA\u003c\/li\u003e\n\u003cli\u003ePower consumption in ON mode: ~20mA\u003c\/li\u003e\n\u003cli\u003eEngine shutdown output: 3A, High (VBat), Low (GND) or Hi-Z\u003c\/li\u003e\n\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eBattery Isolator Manual v1.1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDrawings – Battery Isolator\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ECU master","offers":[{"title":"Default Title","offer_id":55601512776020,"sku":"ECUM519","price":929.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/files\/ECU-Master-Battery-isolator-Radlock.webp?v=1776856680"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/3974\/8180\/collections\/ecu-master-PMU.webp?v=1781253466","url":"https:\/\/rocketspeedshop.com\/collections\/ecumaster-pmu-isolator.oembed","provider":"Rocket Speed Shop","version":"1.0","type":"link"}